... the numeric data and interrelation of α_Re and α_Ab. Findings Zircon pigments can be thoroughly decomposed into some dissoluble zirconate–silicate resultants by SAD2 at a ratio of the fluxing agent to pigment over 6. ICP-OES is proved more suitable than some other...

...Peter Greenwood © Emerald Group Publishing Limited 2013 --> Aqueous Colloidal silica Colloids Dispersions Epoxy silane Pigments Silica sol Silicates Surface modification Article Type: 2012 Awards for Excellence From: Pigment & Resin Technology, Volume 42...

...Anna Modrzejewska‐Sikorska; Filip Ciesielczyk; Teofil Jesionowski Purpose The purpose of this paper is to propose a new method of synthesis of CuO · SiO₂ oxide composite based on the reaction of precipitation from water solutions of sodium silicate and copper nitrate. Design...

... Emerald Group Publishing Limited 2012 Dyes Pigments Silicates Zeta potential Electrophoretic mobility Hybrid pigments SiO² support Organic dyes Electrokinetic (zeta) potential is a very important parameter that describes the surface properties of solid particles...

... 2011 Epoxy silane Surface modification Silica sol Colloidal silica Aqueous Pigments Dispersions Colloids Silicates Concentrated colloidal silica in the form of aqueous sols is one of the cheapest and most readily available sources of nanoparticles. Such sols are characterised...

... for second order quadruple interaction. Minerals Silicates Polymers Ultraviolet radiation Physical properties of materials In recent years, the montmorillonite has been widely used in the preparation of nanocomposite (Liang et al., 2008). Generally, the preparation of polymer/clay...

... pocket, and stirred for 90 min at 60°C. While stirring, 18.05 g of water was added dropwise. The reaction mixture was stored for 140 h at 50°C and then diluted with ethanol in a ratio of 1:2. Coatings Resins Polyurethane Silicates Coatings Polyurethanes (PUs) are proven high...

...Peter Greenwood Purpose The purpose of this paper is to investigate epoxysilane‐modified silica sols as surfactant‐free inorganic pigments dispersants and as co‐binders/reinforcing agents for silicate paints. Design/methodology/approach The performance of epoxysilane‐modified silica sols...

.../implications Only TiCl₄ is used as titania source. In addition, only silica cores obtained by Stöber synthesis are used while commercially available silica solutions made from sodium silicate are not used. Practical implications The process offers a method of producing a white composite pigment...

... et al., 2005). Paints Pigments Corrosion protection Silicates Another type of pigment is hydrated zinc phosphomolybdate (del Amo et al., 2004). The molybdate anion content is only small (1.5 per cent), yet the synergic effect of anions is employed, whereas molybdate...

...B. Klapiszewska; A. Krysztafkiewicz; T. Jesionowski Purpose The study reported here concerned production of green pigments, hydrated nickel(II) silicates and oxides, obtained by precipitation from solutions of sodium metasilicate and sodium hydroxide using nickel(II) sulphate. Design...

... the tanning industry refuses were applied. The studies were directed to obtain pigments of the following composition: xCr₂O₃ ySiO₂ zH₂O. Basic conditions of precipitation process, filtration and drying of silicate pigments were established. Moreover, principal...