... materials. In the second phase, the effect of various textures was also studied with the help of Image J software. Optimization techniques Surfaces Polymers Physical properties Mechanical behaviour of materials Strength of materials Erosion wear The slurry erosion tests were...

... 10 2019 20 11 2019 18 12 2019 04 01 2020 © Emerald Publishing Limited 2020 Emerald Publishing Limited Licensed re-use rights only Composites Epoxy resins Nanotechnology Strength of materials Interfacial adhesion MWCNTs Thiokol oligomer Epoxy resins...

... measured using Brookfield viscometer (Anton Paar DV‐1P, Austria) at room temperature with spindle R2 with the speed of 100 rpm (Amaral et al., 2005). Polymerization Strength of materials Emulsions Acrylic emulsion UV radiation TMPTA Peel strength Tackiness Cohesive strength UV...

... and efficient energy utilisation (Burak, 1997 ; Linda, 2007). The conventional solvent borne coatings will be replaced by the UV curing technology (V. P. T., 1990). © Emerald Group Publishing Limited 2010 Polyurethane Oxidation resistance Coatings technology Strength of materials...

... of materials Strength of materials Chemical technology processes Epoxy resins are one of the most important classes of thermosetting polymers. These resin networks have many desirable properties, which include high‐tensile strength, excellent chemical and corrosion resistance and good dimensional...

...‐Nicolet Nexus‐870‐FTIR spectrometer. © Emerald Group Publishing Limited 2006 Rubbers Resins Epoxy resins Strength of materials The toughness of many epoxy resins, i.e. the ability to dissipate energy at the crack tip, is not sufficient to qualify for a number of applications...

... Strength of materials Resins The utilization of wood and agro‐fibres residues in manufacture of lignocellulosic composites (fibre‐ and particle‐boards) is very important for the conservation of forest wood biomass and protection of environment. Wood adhesives are essential component...

... in Figure 1 . © Emerald Group Publishing Limited 2005 Epoxy resins Adhesives Polymers Strength of materials ATPEGB was synthesised from polyethylene glycol (PEG 600) and 4‐amino benzoic acid in the presence of p‐toluene sulphonic acid (PTS) in catalytic amount...