– The purpose of this paper is to evaluate the mechanical properties of photopolymer/CB (carbon black) nanocomposite when applied in a visible-light rapid prototyping (RP) machine.
– The mechanical properties of the samples such as hardness and tensile strength along with thermal stability were analyzed. The curing time behavior of the photopolymer/CB nanocomposites was tested by using a rigid-body pendulum rheometer. The shrinkage property and dimensional stability were also analyzed using the technique according to ASTM D2566 and ASTM D1204, respectively.
– The results showed that the prototype fabricated from pristine photopolymer tended to exhibit poor mechanical properties and low thermal stability. However, after adding the photopolymer with various concentrations of nano-CB and dispersant in appropriate composition, the photopolymer/CB nanocomposite prototype not only reduced its curing time but also enhanced its mechanical properties, thermal stability and dimensional stability.
– The presented results can be used in a visible-light RP machine.
– The mechanical and thermal properties of photopolymer are improved with nano-CB additives for a RP system.
