The purpose of this paper is to present an algorithm for an additive/subtractive rapid pattern manufacturing (RPM) process where thick slabs of material are sequentially stacked and then cut to 3D shapes. Unlike traditional rapid prototyping processes where layer thickness is typically uniform, this process is able to vary the layer thickness in order to most effectively generate feature shapes.
This paper discusses the factors affecting layer thickness decisions and then presents an algorithm to determine layer thicknesses for a given part model. The system is designed to import a computer‐aided design file and use the algorithm to automatically generate the set of layers based on the slab height, material and bonding properties and the process parameters used in the system.
The layer thickness algorithm is implemented and tested using an additive/subtractive manufacturing system developed in the laboratory. The algorithm has proved effective in determining appropriate layer heights for thick slab machining, taking into account a variety of geometries. Several sand casting patterns have been successfully created using the proposed system, which could significantly improve traditional sand casting pattern manufacturing.
The proposed RPM process is a new process presented by the authors, developed for rapid sand castings. The layer thickness algorithm is an original contribution that enables automatic process planning for this new process.
