The purpose of this paper is to investigate the process of rapid prototyping eddy current sensors using 3D printing technology. Making full use of the advantages of 3D printing, the authors study on a new method for fabrication of an eddy current sensor.
In this paper, the authors establish a 3D model using SolidWorks. And the eddy current sensor is printed by the fused deposition modeling method.
Measurement results show that the 3D printing eddy current sensor has a wider linear measurement range and better linearity than the traditional manufacturing sensor. Compared to traditional eddy current sensor fabrication method, this 3D printed sensor can be fabricated at a lower cost, and the fabrication process is more convenient and faster.
This demonstrated 3D printing process can be applied to the 3D printing of sensors of more sophisticated structures that are difficult to fabricate using conventional techniques.
In this work, the process of rapid prototyping eddy current sensors using 3D printing is presented. Sensors fabricated with the 3D printing possess lots of merits than traditional manufactures. 3D printed sensors can be customized according to the configuration of the overall system, thus reducing the demand of sensor's rigid mounting interfaces. The 3D printing also reduce design costs as well as shortens the development cycle. This allows for quick translation of a design from concept to a useful device.
