Additive manufacturing (AM) studies on Inconel 718 (IN718) have focused on exploring its tensile and fatigue response. As IN718 is used in the propulsion and energy sector, the impact of shearing is also critical to ensuring the durability of these components. As such, this study aims to explore the relation between build orientation on the shear cyclic response of direct metal laser sintered (DMLS) IN718.
IN718 torsion specimens were manufactured along six build orientations: (100)-X, (010)-Y, (001)-Z, (110)-XY45, (101)-XZ45 and (011)-YZ45, using the DMLS process. Torsional fatigue testing was performed on as-built specimens, from which fracture behavior, surface roughness, softening/hardening response and monotonic/cyclic shear torsional properties were assessed.
DMLS IN718 was found to exhibit transversely isotropic behavior. In terms of shear stress range and shear modulus, Z > (X, XY45, Y) > (XZ45, YZ45). Specimens cyclically hardened to stabilization and softened to fracture. In terms of torsional fatigue fracture response, the Z, XZ45 and YZ45 specimens exhibited crack initiation and propagation from internal defects, whereas cracks were found to initiate at the surface and propagate between and through build layers for the X, Y and XY45 specimens.
This study reports the torsional cyclic response and shear moduli exhibited by as-built DMLS IN718 manufactured along varying build orientations. The findings are applicable for researchers because of the wide use of IN718 in the gas turbine industry, and the current trend to replace conventional manufacturing with AM.
