Abrasive flow finishing of stereolithography prototypes Available to Purchase

This research investigated the use of two relatively new technologies, abrasive flow machining (AFM) and stereolithography (SL), to minimize the time to develop a finished prototype. Statistical analysis was used to determine effects of media grit size, media pressure, build style, build orientation and resin type on flatness, material removal rate and surface roughness. Results indicated that media pressure, grit size, and build orientation were significant in at least one of the experiments performed. Scanning electron microscope (SEM) images showed the stair‐stepping effect of the SL process before AFM and the removal of the stair‐stepping after AFM. The SEM images showed a lack of typical AFM flowlines on the surface and suggested that the workpiece material is removed by brittle fracture. Data dependent systems analysis techniques were also used to study the surface roughness profiles.