...Murat Demir; Yasemin Seki Purpose The purpose of this study is to investigate surface treatments and fiber types on adhesion properties polylactic acid (PLA) three-dimensional (3D) parts printed on woven fabrics. Design/methodology/approach The cotton, flax and jute fabrics were exposed...

...Rishi Parvanda; Prateek Kala Purpose Fused deposition modelling (FDM) has gained popularity owing to its capability of producing complex and customized profiles at relatively low cost and in shorter periods. The study aims to extend the use of FDM printers for 3D printing of low melting point...

...Farah Syazwani Shahar; Mohamed Thariq Hameed Sultan; Syafiqah Nur Azrie Safri; Mohammad Jawaid; Abd. Rahim Abu Talib; Adi Azriff Basri; Ain Umaira Md Shah Purpose This paper aims to discuss the physical and thermal properties of the three-dimensional (3D) printing natural composite filament...

... of the PCPC parts produced at Aboubaker Idriss Bolad can be contacted at: aboubakerbolad@outlook.com 23 09 2020 24 03 2021 28 06 2021 21 09 2021 16 12 2021 © Emerald Publishing Limited 2022 Emerald Publishing Limited Licensed re-use rights only 3D...

... Publishing Limited Licensed re-use rights only Conductive ink Nano-silver 3D printing Degradable Methylcellulose Advanced manufacturing technologies Rapid prototyping Printing 3D With the emergence of modern printing electronic technology, the printing electronic industry based...

..., working as support and for process simplification. Here, a five degrees of freedom 3D printer that considers a hybrid process based on additive manufacturing of composites with long or short fibers-reinforced thermoplastic matrix is being considered under the FIBR3D project. The printer has the three...

... prototyping Rapid manufacturing Manufacturing Manufacturing systems 3D The additive manufacturing process has potential for application in the manufacturing of automotive and aerospace components as it can produce a porous free structure with low cost. In metal additive manufacturing, parts...

...André Luiz Jardini; Éder Sócrates Najar Lopes; Laís Pellizzer Gabriel; Davi Calderoni; Rubens Maciel Filho; Paulo Kharmandayan Purpose This study aims to assess the design, manufacturing and surgical implantation of three-dimensional (3D) customized implants, including surgical preoperative...

... 6 FDsl+G+DCH 82 1,600-1,040 µm (hybrid) 800-520 µm (hybrid) 400 µm 200 µm 05 07 2019 10 09 2019 03 10 2019 09 11 2019 © Emerald Publishing Limited 2019 Emerald Publishing Limited Licensed re-use rights only Design 3D Selective laser sintering...

... techniques; 3-D printing techniques are applied for producing physical objects layer by layer from computer-aided design models with a short period (Manogharan et al., 2014). Traditional manufacturing technology can not meet some complex and irregular parts manufacturing, which makes 3D printing...

... 03 2018 23 05 2018 27 07 2018 14 10 2018 © Emerald Publishing Limited 2018 Emerald Publishing Limited Licensed re-use rights only Design Layered manufacturing Efficiency Actuators 3D Computational model Additive manufacturing (AM) processes which are layer...

...Azamat Ladinovich Slonov; Azamat Askerovich Khashirov; Azamat Aslanovich Zhansitov; Elena Viktorovna Rzhevskaya; Svetlana Yuryevna Khashirova Purpose This paper aims to examine the impact of three-dimensional (3D) printing technological modes (using fused deposition modelling [FDM]) on physical...

... Emerald Publishing Limited Licensed re-use rights only 3D Advanced manufacturing technologies Layered manufacturing Additive manufacturing (AM) is defined as the process of joining materials, layer upon layer, by fusing, binding or solidifying materials, such as liquid resin and powders...

...Dara G. Schniederjans; Mehmet G. Yalcin Purpose The purpose of this paper is to identify ways in which five technology adoption theories converge to enhance insight on 3D-printing perceptions and adoption. Design/methodology/approach A total of 63 structured interviews were conducted with top...

...Maria Luiza Seixas; Paulo Santos Assis; João Cura D’Ars Figueiredo, Jr.; Maria Aparecida Pinto; Daniella Gualberto Caldeira Paula Purpose This paper aims to present a proposal for the restoration of a silver crown by means of fitting pieces produced by the process of 3D modelling and rapid...

... appliance is a fixed orthodontic appliance bonded on both upper molars. It consists of a crown (cobalt-chromium alloy) and an occlusal inclined plane made of SR Chromasit material (pressure/heat-curing micro filled veneer material). The crown is produced using 3D computer design and a specific method of SLM...

.... In relation to fiber-reinforced plastic composites, combinations of textile materials with 3D printed polymers result in different mechanical properties. While the tensile strength of the multi-material system is increased compared to the pure 3D printed material, the elasticity of the polymer layer can...

...Yunbo Zhang; Tsz Ho Kwok Purpose The purpose of this paper is to establish new computer-aided-design (CAD) framework to design custom product that is fabricated additive manufacturing (AM), which can produce complex three-dimensional (3D) object without additional tool or fixture. Additive...

... 2017 Emerald Publishing Limited Licensed re-use rights only 3D Layered manufacturing Rapid manufacturing Scaffolds Porous materials Cellular manufacturing Here, S_pore represents the square of the pore. The porous tantalum structures were characterized by optical microscope...

... This work provides insightful information regarding the use of high viscosity materials on the 3D printing process. Table I Grades of ABS used in this study Reference Description MFI 230/5 (g/10 min) Price (EUR/kg) ABS-GP Pellets of commercial multipurpose ABS (Ronfalin TRE 39...