... 04 2026 © 2026 Emerald Publishing Limited 2026 Emerald Publishing Limited Licensed re-use rights only Additive Manufacturing (AM) Fused Filament Fabrication (FFF) Void volume Contact area Build orientation Raster angle PA6-CF Natural Sciences and Engineering Research...

.... Corresponding author Mathias Fleisch mathias.fleisch@stud.unileoben.ac.at 01 09 2025 11 12 2025 22 01 2026 © 2026 Emerald Publishing Limited 2026 Emerald Publishing Limited Licensed re-use rights only Additive manufacturing (AM) Material extrusion (MEX) Digital twin Finite...

...@uetpeshawar.edu.pk Conflict of interest: The authors declare no competing interests. 06 08 2025 23 10 2025 15 12 2025 © 2025 Emerald Publishing Limited 2025 Emerald Publishing Limited Licensed re-use rights only Additive manufacturing (AM) Fused deposition modeling...

...Krishnanand; Mohammad Taufik Purpose The purpose of this paper is to develop a versatile extrusion system for solid-based additive manufacturing ( AM ) that overcomes the limitations of using only filament or pellet extrusion. By combining both in one setup, the study targets enhanced material...

... Publishing Limited 2025 Emerald Publishing Limited Licensed re-use rights only Carbon fiber (CF) 3D printing Filament deposition modeling (FDM) Fused filament fabrication (FFF) Additive manufacturing (AM) Mechanical properties Spain University of Zaragoza, the Spanish “AGENCIA...

...Luis Lisandro Lopez Taborda; Heriberto Maury; Ivan E. Esparragoza Purpose Additive manufacturing (AM) offers shape freedom at low costs, which benefits medical and personalization (ME&P) product design. This study aims to develop a methodology for structuring the state-of-the-art design of ME...

...Mingyu Gao; Jinghua Xu; Kunqian Liu; Shuyou Zhang; Jianrong Tan Purpose The purpose of this paper is to verify the performance and function of the scale-up prototypes by predicting the material and energy consumption on the basis of dimension-reduced prototypes. Additive manufacturing (AM) costs...

... Publishing Limited 2024 Emerald Publishing Limited Licensed re-use rights only Manuel Rodríguez-Martín can be contacted at: ingmanuel@usal.es 24 11 2023 10 04 2024 23 05 2024 28 05 2024 Additive manufacturing (AM) Manufacturing Industry 4.0 Meta-analysis...

...Alberto Giubilini; Paolo Minetola Purpose The purpose of this study is to evaluate the 3D printability of a multimaterial, fully self-supporting auxetic structure. This will contribute to expanding the application of additive manufacturing (AM) to new products, such as automotive suspensions...

...Roberto Junior Algarín Roncallo; Luis Lisandro Lopez Taborda; Diego Guillen Purpose The purpose of this research is present an experimental and numerical study of the mechanical properties of the acrylonitrile butadiene styrene (ABS) in the additive manufacturing (AM) by fused filament fabrication...

...Shekhar Sharma; Saurav Datta; Tarapada Roy; Siba Sankar Mahapatra Purpose Fused filament fabrication (FFF) is a type of additive manufacturing (AM) based on materials extrusion. It is the most widely practiced AM route, especially used for polymer-based rapid prototyping and customized product...

... and lllopez@uninorte.edu.co 22 04 2023 25 06 2023 10 07 2023 14 07 2023 © Emerald Publishing Limited 2023 Emerald Publishing Limited Licensed re-use rights only Fused filament fabrication (FFF) Fused deposition modeling (FDM) Additive manufacturing (AM) Adhesive joint...

... Publishing Limited Licensed re-use rights only Additive manufacturing (AM) Laser directed energy deposition (DED) Inconel 625 (IN625) Stainless steel 304L (SS304L) Microstructure Additive manufacturing (AM) has become one of the most demanding technologies for manufacturing in industries...

... was approximately 20 µm (voxel size corresponded to approximately 6 µm). © Emerald Publishing Limited 2022 Emerald Publishing Limited Licensed re-use rights only Component manufacturing Tensile strength Heat treatment Material properties Microstructure Maraging steel Additive manufacturing (AM...

...Abdul Wahab Hashmi; Harlal Singh Mali; Anoj Meena Purpose The purpose of this paper is to study the functionality of additively manufactured (AM) parts, mainly depending on their dimensional accuracy and surface finish. However, the products manufactured using AM usually suffer from defects like...

... between idea and final product. An extensive study has been carried out on the mechanical properties of the additive manufacturing (AM) structures categorized by their printing method. However, fused deposition modeling (FDM) is more cost-effective, the simplest and the most accessible method among...

...Mingkai Yue; Meie Li; Ning An; Kun Yang; Jian Wang; Jinxiong Zhou Purpose Selective electron beam melting (SEBM) is one of the popular powder-bed additive manufacturing (AM) technologies. The purpose of this paper is to develop a simulation strategy for SEBM process to get data which are vital...

... evaluate the nominal displacement in the E axis to get the desired amount of material printed for each bead on the build plate. © Emerald Publishing Limited 2020 Emerald Publishing Limited Licensed re-use rights only Additive manufacturing (AM) Fused filament fabrication (FFF) Fused...

...Cemal İrfan Çalışkan; Ümit Arpacıoğlu Purpose The purpose of this article is on the functional usability of metal additive manufacturing (AM) direct metal laser sintering (DMLS) production technology process parameters in the construction industry. In the study, the advantages of thermal...

... to remove the effect of slack during the testing. To characterize the compressive behavior, specific energy absorbed (e_{p) by specimen till the peak load is calculated using MATLAB by the area under the load-displacement curve using equation (2) : Additive manufacturing (AM) Stereolithography}...