...Girish G. Purpose This study aims to develop a triple-layered build structure by overlapped friction stir additive manufacturing ( FSAM ) technique using 7075-O 2-mm-thick aluminium sheets. This novel study primarily focused on material consolidation within the build and its corresponding...

... in SS–Al transitional wall deposition. Amrit Raj Paul can be contacted at: amrit.cmeri20j@acsir.res.in 13 03 2023 29 05 2023 21 08 2023 Wire arc directed energy deposition Stainless steel Aluminium Copper interlayer Interface characteristics The major challenge...

...Sunidhi Dayam; Puneet Tandon; Satwik Priyadarshi Purpose This study aims to explore a technique of metal additive manufacturing (MAM) for producing parts in aluminium. The proposed technique mimics the process of metal injection moulding but with the tools meant for fused freeform fabrication...

... Haihong Zhu can be contacted at: zhuhh@mail.hust.edu.cn 22 02 2020 19 06 2020 07 08 2020 © Emerald Publishing Limited 2020 Emerald Publishing Limited Licensed re-use rights only Aluminium AlSi10Mg Selective laser melting Formation mechanism Pores Selective...

... © Emerald Publishing Limited 2019 Emerald Publishing Limited Licensed re-use rights only Printing Advanced manufacturing technologies Numerical simulation Aluminium AM = Additive manufacturing; BCC = Body-centered cubic; DIC = Digital image correlation...

... properties of parts made from aluminium 4047A built in droplet-based metal printing. Design/methodology/approach A drop-on-demand print head with pneumatic actuation is used to eject droplets on a nickel sheet mounted on the heated build platform. Tensile specimens are machined from cuboid blocks built...

... mechanisms of an aluminium‐filled polyamide and of a new alumina‐polyamide composite produced by SLS, in comparison with unfilled PA. Design/methodology/approach A specific focus is set on the evaluation of primary and secondary anisotropy in the case of metal or ceramic filler, as well...

... boat propeller. Aluminium and room temperature vulcanising (RTV) rubber moulds were manufactured and tested within the study. Manufacturing costs and dimensional control parameters were used within the comparison study. For the dimensional deviation performance factor used, no significant differences...