... (Sb₂O₃) with increasing amounts (3 wt%, 5 wt% and 10 wt%) for hard tissues. Other than the thermal/flow characterization and internal structural analyses, as for evaluating the effectiveness of the produced filament under computed tomography (CT) imaging, two detailed anthropomorphic phantoms (L3...

... by the operator and varied depending on the focus of the analysis. Microstructure Laser sintering Computed tomography Quality control Non-destructive testing Micro-composite Additive manufacturing (AM), more commonly referred to as 3D printing, is a term encompassing a family of processes which...

... distribution of proxies have been measured with helium porosimetry, mercury porosimetry and computed tomography (CT) image analysis. Laboratory results on proxies have been compared with properties calculated on digital designs and CT images. Findings Bulk volume of proxies was by 0.6-6.7 per cent lower...

... tessellation language (STL) model, which is commonly obtained from computed tomography (CT) data. The aims of this study were to assess the image quality and the accuracy of STL models acquired using different CT scanners and acquisition parameters. Design/methodology/approach Images of three dry human...

.... M. Fantini can be contacted at: massimiliano.fantini@unibo.it © Emerald Group Publishing Limited 2015 Rapid prototyping CAD/CAM Computed tomography Implant surgery Titanium mesh Nowadays, in the field of prosthodontic rehabilitation, the use of cone beam computed tomography...

... was obtained. Two patients diagnosed with DH were scanned using the Computed Tomography (CT) scanner “SOMATOM Sensation 16” (Siemens, Germany). Scan parameters used are shown in Table I . CT scan accuracy generally falls within ±20 per cent of the slice data. Therefore, CT data with a slice thickness of 1 mm...