... curves revealed that the corrosion resistance of AMCs increased compared to the rod. AMCs also displayed up to 423 mV passivation range. Originality/value MFSD-AM represents a key breakthrough in additive manufacturing, offering new possibilities for the fabrication of hybrid composites...

...., 2021 ; Chivel, 2016 ; Tudu, Baruah and Prasad, 2023). 316L stainless steel (SS316L) finds extensive use in biomedical implants, food processing equipment and marine applications due to its excellent corrosion resistance, biocompatibility and formability. Inconel 625, a nickel-based superalloy...

...Xueping Ding; Qi Zhang Purpose This study aims to compare and study the differences in corrosion resistance and microstructure for a Ti6Al4V sample fabricated by wire-feed laser vacuum additive manufacturing ( AM ) and the wrought Ti6Al4V alloy. Design/methodology/approach An electrochemical...

... process and heat treatment process. Tensile test and Vickers microhardness analysis were conducted to determine the mechanical properties. Findings Heat-treatment at 1250 °C shows a balanced phase fraction (1:1) and improved corrosion resistance (1.541 mpy) than the as-fabricated and other heat...

... to the original publication and authors. The full terms of this licence maybe seen at Link to the terms of the CC BY 4.0 licence. Material extrusion Composite material Filament moisture Corrosion resistance In the past years, the requirements for additive manufacturing (AM) materials have...

...Jie Chen; Yongqiang Yang; Shibiao Wu; Mingkang Zhang; Shuzhen Mai; Changhui Song; Di Wang Purpose In this paper, the mechanical properties and corrosion resistance of CoCr alloy fabricated by selective laser melting (SLM) were studied, and the changes of performance after porcelain sintering...

... resistance significantly. Originality/value In this study, the HIP process and subsequent T6 heat treatments were applied to AlSi10Mg parts produced by the DMLS technique. The study aims to increase the corrosion resistance of AlSi10Mg parts by reducing porosity with the HIP process and by altering...

... was investigated by the varying laser scanning speeds between 200 and 1,500 mm/s with the other parameters fixed as constants. The investigations of density, phase, mechanical property and corrosion resistance were conducted. Findings It was found that a maximum relative density of 99.4 per cent was obtained...

...Frank Alifui‐Segbaya; Paul Foley; R.J. Williams Purpose Rapid manufacture‐produced cobalt chromium alloys are beginning to be used in dentistry but there are few published results relating to their properties. The purpose of this paper is to determine the corrosion resistance of a rapid...