... printers. It also highlights the practicable worth of statistical design of experiments in overcoming low-cost equipment restrictions, as well as ease of application in broader utilizations in clinics and academic institutions. DLP 3D printing Process parameter optimization Design of experiments...

... manufactured via DLP 3D printing procedures. The quality of 3D-printed polymer parts depends on selecting optimal process parameters. With the application of design of experiments (DOE) via Taguchi, process parameter optimization can be achieved in a cost-effective manner (Prabhakaran et al., 2024...

... magnets NdFeB Laser powder bed fusion Process optimization Design of experiments Sustainability The study achieved significant improvements in density, coercivity and remanence through precise parameter control, heat treatment and magnet vacuum annealing, demonstrating the feasibility...

... Emerald Publishing Limited Licensed re-use rights only Nano graphene Photopolymer composite Design of experiments Taguchi Regression analysis Masked stereolithography Shape memory polymers (SMPs) are into research for many years, as a result of which many advancements are taking place...

... and hard PP resin. In this study, a total of nine experiments were designed based on the L9 orthogonal array (OA) using the design of experiments (DOEs). All the shape memory photopolymer composite’s (SMPPCs) specimens are fabricated using masked stereolithography (MSLA), also known as resin three...

... Rahmati et al. suggested a neural network approach to discover the optimal parameters for greater accuracy and also predicted the dimensional accuracy with a 6% error rate (Rahmati, 2014). With the application of design of experiments (DOE) through Taguchi, one can reduce the overall cost...

... characterized following a design of experiment approach. Findings The results show a failure in the substrate, due to the low strength of the polymeric adherends for the first batch of typical bonded configurations, single lap, joggle lap and double lap. The central bonded area, with an increased global...

... the metrology and geometry of the print. Fused deposition modelling (FDM) Nylon 6/66 Design of experiments Impact strength Micro computed tomography (µ-CT) Polymer crystallinity ISO/ASTM 52900 describes additive manufacturing (AM) as “a process of joining materials to make objects from...

... 08 06 2021 © Emerald Publishing Limited 2021 Emerald Publishing Limited Licensed re-use rights only Design of experiments Mechanical properties Post-processing Thermal testing Binder jet printing Binder jet three-dimensional (3D) printing is a type of additive...

... the impact of ME parameters on specimen maximum load and load-displacement curves. Moreover, to investigate the recovery efficiency based on the initial and post toughness generated by the compact tension test. Design/methodology/approach A design of experiments with three parameters (temperature...

... curve, strain recovery, instant shape-fixity ratio, long-term shape-fixity ratio and recovery ratio of SMP specimens during a thermo-mechanical cycle were investigated. Design/methodology/approach The ME fabrication settings for the SMP specimens were defined by implementing a design of experiments...

... 2017 26 03 2017 31 03 2017 © Emerald Publishing Limited 2018 Emerald Publishing Limited Licensed re-use rights only FDM Additive manufacturing Automated assembly Design-for-assembly Design-for-manufacturability Design of experiments Additive manufacturing (AM...

...Dr Eujin Pei; Garrett W. Melenka; Jonathon S. Schofield; Michael R. Dawson; Jason P. Carey Purpose – This paper aims to evaluate the material properties and dimensional accuracy of a MakerBot Replicator 2 desktop 3D printer. Design/methodology/approach – A design of experiments (DOE) test...