.... Optimized parameters reduced R_a from 11.92 ± 0.34 to 3.45 ± 0.18 µm (71%) and R_z from 51.96 ± 1.42 to 12.57 ± 0.64 µm (76%), while minimizing dimensional deviation by 73%. Scanning electron microscopy revealed smoother, denser surfaces, and energy-dispersive X-ray...

... calibration. Dimensional measurements of specimen length and height were obtained using a coordinate measuring machine. Tolerance grades, dimensional deviations and process capability indices (C_p and C_pk) were analyzed. Furthermore, an in vitro study...

... from the nominal dimension (i.e. target value). The amount of this linear deviation is usually referred to as dimensional deviation or bias and is categorized as a systematic error. The smaller the dimensional deviation or bias is, the higher the dimensional accuracy would be. In this paper...

... 05 04 2015 24 12 2016 18 04 2017 © Emerald Publishing Limited 2018 Emerald Publishing Limited Licensed re-use rights only Three-dimensional printing Compressive strength Dimensional deviation Homogeneous Open porous Pressureless sintering Table II...