... at Link to the terms of the CC BY 4.0 licence. Distortion Residual stress Finite element modelling Creep Fused deposition modelling Additive manufacturing (AM) has rapidly grown in popularity in recent years due to the availability of low-cost approaches such as Fused Filament...

... 2020 18 12 2020 14 04 2021 07 05 2021 08 05 2021 © Emerald Publishing Limited 2021 Emerald Publishing Limited Licensed re-use rights only Process parameters Finite element modelling Infill 3d printing Free vibrations End-use parts are currently targeted...

... Polyamide 12 Finite element modelling Cooling process Figure 1 Picture of the geometry of the container with outer dimensions of 310 × 155 × 80 mm (left) and position of the thermocouples in the container (1, 2, 8-12) and on the SLS part (13-16) (right) used in this study The powder...

... − ρ o 1 − ρ o ) 3 2 ( 1 − ρ o ) Selective laser melting Finite element modelling Hot isostatic pressing Powder consolidation where E(1,T) is the modulus of elasticity at relative density of 1 (no porosity) and temperature (T...

... at: sonjoy@buffalo.edu 02 06 2016 18 08 2016 22 08 2016 © Emerald Publishing Limited 2017 Emerald Publishing Limited Licensed re-use rights only Additive manufacturing Stereolithography Finite element modelling Cohesive zone model Traction separation law...

... with transient stresses, i.e. distortion is dominated by the state of transient stresses. Furthermore, at the material and laser processing condition investigated here, the effect of the residual thermal stress on distortion is opposite to that of the transient stress. The present finite element modeling...