... of filament-level architecture and printing parameters. Design/methodology/approach Core-shell PLA-TPU filaments were fabricated using a dual-extrusion fused deposition modelling process and reprinted into shape memory specimens. Cyclic thermomechanical tests were conducted under repeating programming...

... (RA1 and R2A) with re-entrant (2D) auxetic geometries and a third structure (R1NA) with periodicity in both axial and radial directions, exhibiting a fully 3D re-entrant auxetic form. All structures were fabricated using fused deposition modeling with polylactic acid. Their mechanical performance...

...-commercial purposes), subject to full attribution to the original publication and authors. The full terms of this licence may be seen at Link to the terms of the CC BY 4.0 licence. Distortion Residual stress Finite element modelling Creep Fused deposition modelling Additive manufacturing...

... 2025 Emerald Publishing Limited Licensed re-use rights only Control systems Fused deposition modelling 3D Printing Engineering design ventilation Contaminant mitigation Fused filament fabrication (FFF) has emerged as one of the most prominent 3D printing technologies. In 2023...

... et al., 2019). Whilst there have been reviews of mechanical properties based off print parameters, there is a gap found when vapour smoothing is included (Abdulrazaq et al., 2023). Additive manufacturing 3D printing Fused filament fabrication Fused deposition modelling Vapour...

...Umamaheshwer Rao A.C.; Venkateshwar Reddy Pathapalli; Krishna Teja Godavarthy; Vijay Kumar Mahakur; Venkatesh B.; Deepak Kolar Purpose Fused deposition modelling ( FDM ) is used in the study to assess the mechanical and surface characteristics of 3D-printed materials. This study aims to examine...

... only Polylactic acid Polypropylene Composite Wear COF Material extrusion Taguchi methodology Fused deposition modelling Additive manufacturing (AM) technologies have been widely used in the automotive, aerospace and medicine sectors for two decades. Based on ISO/ASTM 52900 standard...

... fused deposition modeling models, as it can greatly enhance their production efficiency. The principle of forming in FDM determines that layer thickness is an important process parameter affecting both the surface finish (Wankhede et al., 2020 ; Lalegani and Lalegani Dezaki, 2021; Pérez...

... of fusion and crystallization of polymers by differential scanning calorimetry ”. ASTM (2016), “ D412 - Standard test methods for vulcanized rubber and thermoplastic elastomers— tension ”. Awasthi , P. and Banerjee , S.S. (2021), “ Fused deposition modeling of thermoplastic...

... as compared to the conventional method. In the same year, Shan et al. (2003) made mould prototypes using ceramic material using fused deposition modelling (FDM) and laminated object manufacturing (LOM) techniques. The metal shrinkage ratio was simulated through FEM software. The surface...

...Fredrick Mwania; Maina Maringa; Joseph Nsengimana; Jacobus Gert van der Walt Purpose The current analysis was conducted to investigate the quality of surfaces and geometry of tracks printed using PolyMideTM CoPA, PolymaxTM PC and PolyMideTM PA6-CF materials through fused deposition modelling (FDM...

...Shrushti Maheshwari; Zafar Alam; Sarthak S. Singh Purpose The purpose of this study is to experimentally investigate the large deformation compression characteristics of fused deposition modelling (FDM)-printed poly lactic acid (PLA), considering the combined effect of infill density and strain...

...Prashant Anerao; Atul Kulkarni; Yashwant Munde Purpose This paper aims to investigate the current state of biocomposites used in fused deposition modelling (FDM) with a focus on their mechanical characteristics. Design/methodology/approach The study presents a variety of biocomposite materials...

... synthesizer and natural additives such as glycine to finish 3D printed parts. Characterization of the media was conducted through thermogravimetric analysis and Fourier transform infrared spectroscopy. PLA crescent prism parts were produced via fused deposition modelling (FDM) and finished using AFM...

...Wafa' AlAlaween; Omar Abueed; Belal Gharaibeh; Abdallah Alalawin; Mahdi Mahfouf; Ahmad Alsoussi; Nibal Albashabsheh Purpose The purpose of this research paper is to investigate and model the fused deposition modelling (FDM) process to predict the mechanical attributes of 3D printed specimens...

... properties. Fused deposition modeling (FDM) is a common additive manufacturing technique that uses thermoplastic filaments to produce a 3D model. Derise and Zulkharnain (2020) conducted tensile testing to identify how the infill properties differ from one another. Various specimens with diamond, hexagonal...

... of the average height difference for the average surface, and Sa is the mean of the average height difference for the average plane. Fused deposition modelling Additive manufacturing Material extrusion Foamable polylactic acid filament Lightweight composite beam Porous structures This work...

... 14 04 2022 20 05 2022 23 05 2022 © Emerald Publishing Limited 2022 Emerald Publishing Limited Licensed re-use rights only Fused filament fabrication Additive manufacturing Metrology Fused deposition modelling Technology transfer African metrology institutes...

... at: sapkota.janak@outlook.com 16 11 2021 17 02 2022 25 04 2022 13 05 2022 © Emerald Publishing Limited 2022 Emerald Publishing Limited Licensed re-use rights only Rapid prototyping Fused deposition modelling Composite materials Injection moulding Fibre Filament...

...Lorenzo Malagutti; Valentina Mazzanti; Francesco Mollica Purpose The architecture of 3D-printed parts made through fused deposition modelling (FDM) with raster infill resembles that of composite laminates. Classical lamination theory (CLT), the simplest model for composite laminates, has been...