... and specific feder arrangements. It uniquely applies the Taguchi method to optimize these geometric parameters for PLA + structures produced via FDM . The study provides valuable experimental data on the crashworthiness of graded multi-cell structures, offering a lightweight solution for enhancing passive...

... 08 01 2026 05 03 2026 © 2026 Emerald Publishing Limited 2026 Emerald Publishing Limited Licensed re-use rights only DLP 3D printing Process parameter optimization Design of experiments Taguchi method Taguchi-gray analysis Digital light processing Building time...

... is to optimize the process parameters (namely, layer thickness, cure depth and build orientation) that affect the dimensional and geometric accuracy of DLP-printed parts. Design/methodology/approach The experimental design of the Taguchi method was used to examine the effects of process parameters...

... Selective laser sintering PA2200 Optimization Taguchi method Bones are the main constituent of the human skeletal system. They not only protect vital organs but also ensure structural integrity and mobility of the human body. Bones exhibit excellent self-healing capability (Dooley and Taylor...

.... Taguchi method and response surface method were used to optimize process parameters (energy density, hatch spacing, scanning speed and beam diameter). Design/methodology/approach Laser powder bed fusion (LPBF) offers significant design freedom but suffers from residual stresses due to rapid melting...

... by the Taguchi method. The documented results can be further developed for an optimization model to obtain a desired mechanical property with less variation and uncertainty in a product. Sermet Demir can be contacted at: sdemir@dogus.edu.tr 17 06 2022 19 08 2022 22 09 2022 © Emerald...

... bridge between quartz sand powders. Dequan Shi can be contacted at: ipaper86280@163.COM 14 11 2019 22 05 2020 17 08 2020 28 11 2020 31 12 2020 The Taguchi method was used to set up four factors and four levels’ orthogonal tests, and Table 1 shows the factors...

... focuses on four key printing parameters and two end-product quality properties. Sixteen groups of orthogonal experiment designed by the Taguchi method are conducted, and then the results are converted to signal-to-noise ratios and analyzed by analysis of variance. Findings Five sets of optimal...