This study aims to address the issue of high-precision measurement of AC electric field. An electro-optical sensor with high sensitivity is proposed for this purpose.
The proposed sensor combines electromagnetic induction and fiber Bragg grating (FBG) sensing techniques. It is composed of a sensing probe, a piece or stack of piezoelectric ceramics (PZT) and an FBG. A signal processing circuit is designed to rectify and amplify the induced voltage. The processed signal is applied to the PZT and the deformation of PZT is detected by FBG. Theoretical calculation and simulation are conducted to verify the working principle of the probe. The sensor prototype is fabricated and its performance is tested.
The results of this study show that the sensor has good linearity and repeatability. The sensor sensitivity is 0.061 pm/Vm−1 in the range from 250 to 17,500 V/m, enabling a measurement resolution of electric field strength of 16.3 V/m. The PZT stack is used to enhance the sensor sensitivity and the resolution can be improved up to 3.15 V/m.
A flexure hinge lever mechanism is used to amplify the deformation of PZT for further enhancement of sensitivity. The results show that the proposed sensor has high sensitivity and can be used for the accurate measurement of an electric field. The proposed sensor could have potential use for electric field measurement in the power industry.
