Skip to Main Content
Article navigation
Volume 35, Issue 5
1 May 1988
This article was originally published in
Anti-Corrosion Manual
Anti-Corrosion Manual Cover Image for Volume 35, Issue 5
Review Article| May 01 1988

EQUIPMENT Available to Purchase

Author & Article Information
Publisher: Emerald Publishing
Online ISSN: 2977-7003
Print ISSN: 0066-4731
© MCB UP Limited
1988
Anti-Corrosion Manual (1988) 35 (5): 19.
https://doi.org/10.1108/eb020664

Portable KM1205 measuring printer for pH, temperature, and millivolts for measuring pH in electroplating and coating of metal products. The KM1205 is a battery powered (or mains if required) measuring instrument which can measure and print pH, temperature and millivolts. Accurate printed records can be taken to back up research and reports.

This content is only available via PDF.
© MCB UP Limited
1988
You do not currently have access to this content.
Don't already have an account? Register

Purchased this content as a guest? Enter your email address to restore access.

Please enter valid email address.
Email address must be 94 characters or fewer.
Pay-Per-View Access
$41.00
Rental
This article is also available for rental through DeepDyve. Read this now at DeepDyve
103 Views
View Metrics
A mechanistic study on the passivation degradation of 5083 Al alloy exposed to seawater tidal zone
Microstructure and wear mechanism of different laser-clad zones of Ti-based composite coating with high content of WC particles
Synergistic effect of oxide film and MTZ: achieving optimal corrosion inhibition efficiency for L245 carbon steel in CO2–O2 coexisting environments
Research on the corrosion behavior of the 1050A aluminum alloy under various simulated atmospheric

Suggested Reading

Aviation Electronics
Aircraft Engineering (August,1970)
Equipment
Pigment & Resin Technology (April,1987)
EQUIPMENT
Anti-Corrosion Manual (April,1987)
Aero‐Engine Pyrometer Thermocouples: Notes on the Design, Production, Inspection and Testing Thermo‐Electric Pyrometer Equipment
Aircraft Engineering (June,1941)
EQUIPMENT
Anti-Corrosion Manual (November,1986)

Related Chapters

Paper 3 MEASUREMENT OF CUTTING TOOL FORCES DURING COAL WINNING
CONFERENCE ON STRESSES IN SERVICE
20. Work equipment
Health and safety questions and answers: a practical approach
Lifting operations and lifting equipment
CDM 2015 Questions and Answers: A practical approach

Recommended for you

These recommendations are informed by your reading behaviors and indicated interests.

Cited By

Google Scholar
This Feature Is Available To Subscribers Only

or Create an Account

Close Modal
Close Modal