Skip to Main Content
Article navigation
Volume 8, Issue 6
1 June 1961
This article was originally published in
Corrosion Technology
Corrosion Technology Cover Image for Volume 8, Issue 6
Review Article| June 01 1961

PROTECTIVE PROPERTIES OF VACUUM COATINGS: Present and Future Techniques

N.A. Lockington;
N.A. Lockington
Search for other works by this author on:
This Site
PubMed
Google Scholar
I.J. Tóth
I.J. Tóth
Metallic Surfaces Research Laboratories Ltd.
Search for other works by this author on:
This Site
PubMed
Google Scholar
Author & Article Information
Publisher: Emerald Publishing
Online ISSN: 2155-4854
Print ISSN: 0589-8404
© MCB UP Limited
1961
Corrosion Technology (1961) 8 (6): 168–172.
https://doi.org/10.1108/eb019845

A wide field of applications for vacuum coatings has been opened up by the development of techniques for producing thicker protective coatings and, in some cases, aluminium coatings may replace nickel‐chromium plating. The coating process and basic equipment are discussed herein and an account given of the properties and applications of commercially produced aluminium and cadmium coatings.

This content is only available via PDF.
© MCB UP Limited
1961
You do not currently have access to this content.
Don't already have an account? Register

Purchased this content as a guest? Enter your email address to restore access.

Please enter valid email address.
Email address must be 94 characters or fewer.
Pay-Per-View Access
$41.00
Rental
This article is also available for rental through DeepDyve. Read this now at DeepDyve
119 Views
View Metrics
Fabrication of a polydopamine-stearic acid coating on AZ31 magnesium alloy for enhanced corrosion resistance
Polydopamine coating in Ti and TiO2 nanotubes and its potential use in commercial biomedical implants: surface characterization and corrosion resistance in a physiological solution
Enhancing the corrosion resistance of waterborne epoxy coatings using poly(sodium styrene sulfonate)-modified carbon nanotubes
Electrochemical preparation and corrosion resistance of ZIF coating on carbon steel surface

Suggested Reading

Studies on cadmium telluride–cadmium selenide bilayer
Nanomaterials and Energy (August,2015)
Cr-doped CdS and ZnS nano/microstructures with ferromagnetic properties
Emerging Materials Research (September,2024)
Flame coatings service
Anti-Corrosion Manual (November,1988)
Board-level vapor phase soldering (VPS) with different temperature and vacuum conditions
Multidiscipline Modeling in Materials and Structures (November,2018)
Performances d'un biofiltre à garnissage plastique pour le traitement d'effluents fortement contaminés en phénol, cadmium et chrome
Journal of Environmental Engineering and Science (July,2006)

Related Chapters

Influence of compaction in the hydraulic conductivity and in the mobility of heavy metals in a gneissic residual soil
5th ICEG Environmental Geotechnics: Opportunities, Challenges and Responsibilities for Environmental Geotechnics: Proceedings of the ISSMGE’s fifth international congress organized by the Geoenvironmental Research Centre, Cardiff University and held at Cardiff City Hall on 26–30th June 2006
Vacuum preloading consolidation of Yaoqiang Airport runway
Ground and Soil Improvement
DURABILITY OF HARDENED MORTAR UNDER HIGH-VACUUM CONDITION
Cement Combinations for Durable Concrete: Proceedings of the International Conference held at the University of Dundee, Scotland, UK on 5–7 July 2005

Recommended for you

These recommendations are informed by your reading behaviors and indicated interests.

Cited By

Google Scholar
This Feature Is Available To Subscribers Only

or Create an Account

Close Modal
Close Modal