Skip to Main Content
Article navigation
Volume 30, Issue 12
1 December 1958
This article was originally published in
Aircraft Engineering
Aircraft Engineering Cover Image for Volume 30, Issue 12
Review Article| December 01 1958

New Materials

Author & Article Information
Publisher: Emerald Publishing
Online ISSN: 2059-9366
Print ISSN: 0002-2667
© MCB UP Limited
1958
Aircraft Engineering (1958) 30 (12): 383.
https://doi.org/10.1108/eb033059

The latest addition to the Nimonic series of high temperature nickel alloys is Nimonic 105. This new alloy is a development of Nimonic 100, and is given a minimum life to rupture of 50 hours at 7 T/sq. in. and 940 deg. C. It is particularly resistant to corrosion by solid or molten sulphate products of combustion.

This content is only available via PDF.
© MCB UP Limited
1958
You do not currently have access to this content.
Don't already have an account? Register

Purchased this content as a guest? Enter your email address to restore access.

Please enter valid email address.
Email address must be 94 characters or fewer.
Pay-Per-View Access
$39.00
Rental
This article is also available for rental through DeepDyve. Read this now at DeepDyve
109 Views
View Metrics
Analysis of aerodynamic noise characteristics of high-speed ducted fans under distorted inlet conditions
Development and validation of a perceived aviation risk scale: evidence from public samples
Dynamic energy harvesting in unpowered flight: empirical flight mechanics and aerodynamic design implications
Integrated design method of aircraft RBF neural network-based fault diagnosis and nonlinear dynamic inversion control

Suggested Reading

Optimization of WEDM process parameters in machining Nimonic 75 alloy using brass wire
Multidiscipline Modeling in Materials and Structures (March,2020)
Creep Resisting Alloys for Aircraft Gas Turbines: Details of the Two New Vacuum‐Melted Alloys: Nimonic 110 and Nimonic 115
Aircraft Engineering (August,1962)
Investigating the performance of powder mixed electric discharge machining of Nimonic 75 by using different tool materials
World Journal of Engineering (April,2018)
Parametric optimization in die-sinking EDM of Nimonic 90 alloy using Taguchi-based GRA approach
World Journal of Engineering (November,2020)
Optimization of machining characteristics for EDM of different nickel-based alloys by embodying of fuzzy, grey relational and Taguchi technique
World Journal of Engineering (October,2020)

Related Chapters

DENSITY CHANGES IN CLADDING MATERIALS IRRADIATED IN DFR
VOIDS FORMED BY IRRADIATION OF REACTOR MATERIALS
ELECTRON MICROSCOPE OBSERVATIONS OF VOIDS IN CLADDING MATERIALS IRRADIATED IN DFR
VOIDS FORMED BY IRRADIATION OF REACTOR MATERIALS
26 The fracture toughness of fast reactor irradiated Type 321 stainless steel and Nimonic PE16
Dimensional stability and mechanical behaviour of irradiated metals and alloys

Recommended for you

These recommendations are informed by your reading behaviors and indicated interests.

Cited By

Google Scholar
This Feature Is Available To Subscribers Only

or Create an Account

Close Modal
Close Modal