Skip to Main Content
Article navigation
Volume 4, Issue 12
1 December 1932
This article was originally published in
Aircraft Engineering
Aircraft Engineering Cover Image for Volume 4, Issue 12
Review Article| December 01 1932

A Revolving Welding Table: A Useful Accessory for Uninterrupted Work Available to Purchase

Author & Article Information
Publisher: Emerald Publishing
Online ISSN: 2059-9366
Print ISSN: 0002-2667
© MCB UP Limited
1932
Aircraft Engineering (1932) 4 (12): 321.
https://doi.org/10.1108/eb029637

IN the last few years a considerable amount of research work has been carried out on the manufacturing possibilities of special steels for aircraft construction suitable for welding. At the present time welding enters not only into the detail component parts of aircraft but is becoming much more popular for structural members.

This content is only available via PDF.
© MCB UP Limited
1932
You do not currently have access to this content.
Don't already have an account? Register

Purchased this content as a guest? Enter your email address to restore access.

Please enter valid email address.
Email address must be 94 characters or fewer.
Pay-Per-View Access
$39.00
Rental
This article is also available for rental through DeepDyve. Read this now at DeepDyve
127 Views
View Metrics
Robust longitudinal control for a hypersonic glider with moving-mass actuation via L1-augmented dynamic inversion
Nonlinear geometric multivariable control for unmanned aircraft flight system
Numerical simulation of strut angle optimization for enhanced performance in DLR scramjet combustor
Active disturbance rejection control optimized via chaotic comprehensive learning pigeon-inspired optimization for flapping-wing aerial vehicle

Suggested Reading

Uninterruptible Power Supplies
Library Hi Tech (February,1989)
Research on uninterruptable power supply technology for auxiliary winding of electric locomotive while passing the neutral section
Railway Sciences (February,2024)
Examining the prospect of online education as drivers of effective and uninterrupted university education in the post-COVID-19 era
Journal of Applied Research in Higher Education (May,2023)
NEWS OF INDUSTRY
Corrosion Technology (November,1961)
Design and implementation of maximum constant boost switched inductor z-source inverter for three-phase on-line uninterrupted power supply
COMPEL (July,2015)

Related Chapters

The Crossrail Requirements for the Emergency Power Supplies (Uninterruptible Power Systems)
Crossrail Project: Infrastructure Design and Construction
The development of the method of detecting the anchor tensile force to the impact elastic wave
Ground Anchorages and Anchored Structures in Service 2007: Proceedings of the two day international conference organised by the Institution of Civil Engineers and held in London on 26 and 27 November 2007
The failure of the Mostiště embankment dam
Improvements in reservoir construction, operation and maintenance: Proceedings of the 14th Conference of the British Dam Society at the University of Durham from 6 to 9 September 2006

Recommended for you

These recommendations are informed by your reading behaviors and indicated interests.

Cited By

Google Scholar
This Feature Is Available To Subscribers Only

or Create an Account

Close Modal
Close Modal