The thermal spraying technique of High-Velocity Oxygen Fuel (HVOF) coating was used to deposit coatings of an alloy composed of Ni-based substrates on stainless steel AISI 304. The aim of this study was to determine the mechanical properties such as hardness and bond strength that these coatings have when the spray distance is varied, as well as the microstructure and phases formed during the thermal spray process.
The coatings were applied by HVOF and characterized by scanning electron microscopy, image analysis, X-ray diffraction, microhardness and bond strength to analyze the mechanical properties.
The microstructure of the coatings showed low porosity, oxide content and interface contamination in the substrate–coating interface, without the presence of unmolten particles. The microhardness values reached 600 HV for the three spray distances used and the bond strength values reached over 55 MPa.
The use of coatings on aircraft components is growing dramatically owing to the high costs of advanced materials and the growing lifecycle requirements for high-performance systems, which are taken into account because of the variety of coatings and complexity of environmental factors.
The originality of this study lies in the development of new coating materials for the manufacture and protection of various turbine components. The value is based on the development of materials and processes to be used to manufacture them.
