The purpose of this paper is to study the coupled fixed point problem and the coupled best proximity problem for single-valued and multi-valued contraction type operators defined on cyclic representations of the space. The approach is based on fixed point results for appropriate operators generated by the initial problems.
1. Introduction
One of the most important metrical fixed point theorem, Banach contraction principle, has been generalized in several directions, see for example [1]. The concept of coupled fixed point was introduced by Guo and Lakshmikantham (see [2]). A new research direction for the theory of coupled fixed points was developed by many authors (see [3–9]) using contractive type conditions.
Definition 1.1 ([10]). Let be a nonempty set. A pair is called coupled fixed point of the operator if and . If then is called a strong coupled fixed point of (or, in several papers, a fixed point of ).
Another generalization of the Banach principle was given by Kirk, Srinivasan and Veeramani using the concept of cyclic operators.
Definition 1.2 ([11]). Let and be nonempty subsets of a given set . An operator is called cyclic if and .
More recently, Choudbury and Maity formulated the following definition.
Definition 1.3 ([12]). Let and be nonempty subsets of a given set . An operator having the property that for any and , and , is called a cyclic operator with respect to and .
Definition 1.4 ([13]). Let and be nonempty subsets of a metric space . An operator is called a cyclic Ćirić operator with respect to and if is cyclic with respect to and and for some constant , satisfies the following condition:
where , , and
Theorem 1.1 ([13]). Let A and B be nonempty closed subsets of a complete metric space , a cyclic Ćirić type operator with respect to A and B, with . Then F has a strong coupled fixed point in .
The first aim of this paper is to generalize the above theorem, weakening the contractive condition and excluding the condition . We prove the uniqueness of the strong coupled fixed point and we provide an iterative method for approximating the strong coupled fixed point.
We also present coupled fixed point and coupled best proximity point results for cyclic coupled Ćirić-type multivalued operators.
On the other hand, some qualitative properties of the coupled fixed point set, such as data dependence, generalized Ulam–Hyers stability and well-posedness are studied.
Our approach is based on the following idea: we transform the coupled fixed point/ best proximity point problem into a fixed point/ best proximity point problem for an appropriate operator defined on a cartesian product of the spaces. In this way, many coupled fixed point/ best proximity point results can be obtained using classical fixed point/ best proximity point theorems.
2. Preliminaries
The standard notations and terminologies in nonlinear analysis will be used throughout this paper.
Let be a metric space. We denote:
Let us define the following (generalized) functionals used in this paper:
• The gap functional
• The generalized excess functional
• The generalized Pompeiu–Hausdorff functional
There are several conditions upon the comparison function that have been considered in literature. In this paper we shall refer only to:
Definition 2.1 ([14]). A function is called a comparison function if it satisfies:
(i) is increasing;
(ii) converges to 0 as , for all .
If the condition (ii) is replaced by the condition:
(iii), for any , then is called a strong comparison function.
Lemma 2.1 ([1]). If is a comparison function, then , for any , and is continuous at .
Lemma 2.2 ([14]). If is a strong comparison function, then the following hold:
(i) is a comparison function;
(ii) the function , defined by
is increasing and continuous at.
Example 2.1 ([15]). (1), , where , is a strong comparison function;
(2), , for and , for , is a strong comparison function;
(3), , where , is a strong comparison function;
(4), , is a comparison function, but is not a strong comparison function.
For more examples and considerations on comparison functions see [1] and the references therein.
3. Coupled fixed points of cyclic Ćirić type single valued operators
In this section we present some coupled fixed point results for cyclic Ćirić type operators on complete metric spaces.
We introduce now the following new concept.
Definition 3.1 Let be a metric space, , and a strong comparison function. An operator is called a cyclic coupled -contraction of Ćirić type if the following statements hold:
(i) is cyclic with respect to and ;
(ii)
for any and , where
The following theorem (which is a particular case of Theorem 3.2 in [16]) will be used to prove our results presented in this section.
Theorem 3.1 ([16]). Let be a complete metric space, , be a strong comparison function and be an operator such that and . If is a cyclic -contraction of Ćirić type, that is
for anyand, then the following statements hold:
(1) has a unique fixed point and the Picard iteration defined by , , converges to for any starting point ;
(2)the following estimates hold:
(3)for any , , where is given by Lemma 2.2.
The main result of this section is the following theorem.
Theorem 3.2. Let be a complete metric space, , and a cyclic coupled -contraction of Ćirić type. Then:
has a unique strong coupled fixed point ;
for any , there exists a sequence defined by
that converges to;
(3) the following estimates hold:
(4) for any , , where is given by Lemma 2.2.
Proof. Changing the roles between and and similarly for and , the inequality (3.1) becomes:
For , , denote
Then is a complete metric space.
Let be defined by . We have:
Using the above relation, from (3.3) we get
for any , .
Because and , we have
(3.5) and (3.6) means that the operator is a cyclic -contraction of Ćirić type. Applying Theorem 3.1, there exists a unique such that and the Picard iteration converges to for any starting point . So
where .
From unicity of the pair and the symmetry with respect to and of the system (3.7) we conclude .
Then has a unique strong coupled fixed point and for any starting point there exists a sequence with
that converges to .
(3) By the second conclusion of Theorem 3.1,
and
Hence
(4) Using (3) from Theorem 3.1, for any ,
Hence
Example 3.1. Let , , , , , .
It is easy to verify that is cyclic with respect to and .
For any x, v ∈ A and y, u ∈ B
Then is a cyclic coupled -contraction of Ćirić type, where .
The hypotheses of Theorem 3.2 are satisfied, so by Theorem 3.2, has a unique strong coupled fixed point . By calculation we get:
Our next theorem gives the well-posedness property for the coupled fixed point problem. For the concept of well-posedness for the fixed point problems see [17].
Theorem 3.3. Let be as in Theorem 3.2. Then the coupled fixed point problem is well posed, that is, if there exists a sequence such that
thenand, as.
Proof. Using the inequality
from Theorem 3.2 for and next for , we have:
and letting we obtain
For the data dependence problem we have the following result.
Theorem 3.4. Let be as in Theorem 3.2. Let be such that:
(i) has at least one strong coupled fixed point ;
(ii) there exists such that
Then , where is the unique strong coupled fixed point of and
By letting and in the inequality
Theorem 3.5. Let be as in Theorem 3.2 and , , be such that:
(i) for each there exists a strong coupled fixed point of ;
(ii) converges uniformly to .
Then as , where is the unique strong coupled fixed point of .
Proof. The sequence converges uniformly to . Then there exist , such that as and
Using Theorem 3.3 for , , we have
We will discuss Ulam–Hyers stability for the coupled fixed point problem corresponding to a cyclic operator.
Definition 3.2. Let be a metric space, and be an operator. The coupled fixed point problem
is called generalized Ulam–Hyers stable if there exists increasing, continuous at 0 and such that for any and for any solution of the system
there exists a solution of the coupled fixed point problem such that
In particular, if , then we have generalized Ulam–Hyers stability for the strong coupled fixed point problem .
Theorem 3.6. Suppose that all the hypotheses of Theorem 3.2 hold. Then the coupled fixed point problem (3.8) is generalized Ulam–Hyers stable.
Proof. By Theorem 3.2 we have a unique such that .
Let and such that
We know that
Then for
and next for
using the monotonicity of , we obtain that
As a conclusion, the coupled fixed point problem (3.8) is generalized Ulam–Hyers stable with .
4. Coupled fixed points and coupled best proximity points of cyclic Ćirić type multivalued operators
The purpose of this section is to consider the above problems in the multi-valued setting. We present first a new concept of cyclic multi-valued operator.
Definition 4.1. Let be a metric space, , and a strong comparison function. A multivalued operator is called a cyclic coupled -contraction of Ćirić type multivalued operator if the following statements hold:
(i) is cyclic with respect to and , that is
(ii)
where
Definition 4.2. Let be a metric space. Then is called proximinal if for any , there exists such that
We denote .
Remark 4.1. Let be a metric space. Then
Remark 4.2. Every closed convex subset of a uniformly Banach space is proximinal, see [18].
The following theorem (which is a particular case of Theorem 2.7 in [21]) will be used to prove the first result in this section.
Theorem 4.1. ([21]). Let be a complete metric space, and a multivalued cyclic -contraction of Ćirić type, that is:
(i) and ;
(ii) there exists a strong comparison function such that
for anyand.
Then the following statements hold:
there exists such that ;
for any and , there exists a sequence with , and , , that converges to a fixed point of .
The following lemma presents a well-known result (see for example [22]).
Lemma 4.1. Let be a metric space, the metric defined on by (3,4) and the gap functional, respectively the generalized Pompeiu–Hausdorff functional generated by . Then for any and any , the following statements hold:
.
Proof. (1)(2) Since the sets C and D are proximinal then there exists such that and .
Then
Similarly, we can prove (2).
(3)
Using statement (1), we have
(4) We use statement (2) for .
Lemma 4.2. Let be a metric space, the metric defined on by (3.4) . If a multivalued operator takes proximinal values with respect to then the multivalued operator , takes proximinal values with respect to .
Proof. For any pair is a proximinal set, which means that for any , there exists such that
In a similar way, for any , there exists such that
Then for any , there exists such that
The first result in this section is the following theorem.
Theorem 4.2. Let be a complete metric space, , and a cyclic coupled -contraction of Ćirić type multivalued operator.
Then the following statements hold:
there exist such that
(that is the pairis a coupled fixed point of);
(2) for each there exists a sequence with , and
that converges to a coupled fixed pointof.
It is easy to observe that
If we change the roles between and and similarly for and , then the inequality (4.1) becomes
From (4.1) and (4.2) we obtain
Let , .
We consider on the metric defined by (3.4), using the same functionals and as in Lemma 4.1.
For , , using Lemma 4.1,
By Lemma 4.1,
Using the monotonicity of , (4.3) becomes
By Lemma 4.2, the property of the operator F to have proximinal values is transferred to the operator T, so we are in the conditions of Theorem 4.1.
Then there exists such that and for each there exists a sequence with , and
Hereinafter we define and study the generalized Ulam–Hyers stability of the following coupled fixed point problem.
Let be a metric space, , be a multivalued operator. By definition, the coupled fixed point problem
Our stability result is a consequence of the following theorem.
([21]). Let be as in Theorem 4.2, and be such that . Then there exists a fixed point of such that , where is given by Lemma 2.2.
If all the hypotheses of Theorem 4.2 hold, then the coupled fixed point problem (4.4) is generalized Ulam–Hyers stable.
Let any and let such that
As before, we consider ,
For ,
Applying Theorem 4.3, there exists a fixed point of such that , that is there exists a solution of the coupled fixed point problem (4.4) such that
In the last part of this section we will consider the following best proximity problem for a cyclic coupled multivalued operator:
If is a metric space, , , is a coupled multivalued operator satisfying the cyclic condition , , then we are interested in finding such that
Notice that, in particular, if then is a coupled fixed point of .
Let be a metric space, , . A multivalued operator is called a cyclic coupled Ćirić type multivalued operator if:
(i) and ;
(ii) there exists a comparison function such that
for any , .
In 2009, Suzuki, Kikkawa and Vetro introduced the following property.
[23] Let and be nonempty subsets of a metric space . Then is said to satisfy the property UC if for and sequences in and a sequence in such that and as , then as .
Let and be nonempty subsets of a metric space , and be the metric defined on by (3.4). If and satisfy the property UC with respect to then satisfy the property UC with respect to .
We denote . Let such that and as .
Then
It is obvious that and because satisfies the property UC we get .
From as and using satisfies the property UC we get .
Finally,
We recall the following result.
([25]). Let be a complete metric space, such that satisfies the property UC. Let be a multivalued Ćirić type cyclic operator that is:
(i) and ;
(ii) there exists a comparison function such that
Then the following statements hold:
(1) has a best proximity point ;
(2) there exists a sequence with , and , , such that converges to .
The next result is a consequence of the above theorem.
Let be a complete metric space, such that and satisfy the property UC, and . If is a cyclic coupled Ćirić type multivalued operator, then the following statements hold:
(i) has a coupled best proximity point ;
(ii) there exist two sequences , with
Considering again on the metric defined by (3.4), in a similar manner as in Theorem 4.2, we obtain that the operator ,
Using Lemma 4.1, the pair satisfies the property UC with respect to .
Consequently, we are in the conditions of Theorem 4.5, so T has a best proximity point and there exists a sequence with and such that converges to with respect to .
5. An application to a system of integral equations
We apply the results given by Theorem 3.2 to study the existence and the uniqueness of solutions of the following system of integral equations:
where , ,
We suppose that:
(i) there exist , with , for any , such that
(ii) there exists a strong comparison function such that
(iii) ;
(iv) is monotone decreasing for any and any
(v) is monotone increasing for any and any .
Then the system (5.1) has a unique solution , with .
Let us consider
Then is a Banach space. We consider the following closed subsets of :
and the operator ,
The system (5.1) is equivalent to
We will prove that is cyclic with respect to and , that is
Let .
Using the monotonicity of we have
So . In a similar way we have .
Using the conditions (ii) and (iii), and the monotonicity of , for any , we have
We have
so the operator is a cyclic coupled -contraction of Ćirić type.
All the conditions of Theorem 3.2 are satisfied, so has a unique strong coupled fixed point .
Suppose that the hypotheses of Theorem 5.1 hold. Then the system (5.1) is generalized Ulam–Hyers stable.
By Theorem 5.1, the system (5.1) has a unique solution , with . Applying Theorem 3.6 to the operator ,
The author is thankful to the referees for their useful suggestions. Declaration of Competing Interest: No author associated with this paper has disclosed any potential or pertinent conflicts which may be perceived to have impending conflict with this work.The publisher wishes to inform readers that the article “Coupled fixed points and coupled best proximity points for cyclic Ćirić type operators” was originally published by the previous publisher of the Arab Journal of Mathematical Sciences and the pagination of this article has been subsequently changed. There has been no change to the content of the article. This change was necessary for the journal to transition from the previous publisher to the new one. The publisher sincerely apologises for any inconvenience caused. To access and cite this article, please use Magdaş, A. (2019), “Coupled fixed points and coupled best proximity points for cyclic Ćirić type operators”, Arab Journal of Mathematical Sciences, Vol. 26 No. 1/2, pp. 179-196. The original publication date for this paper was 22/05/2019.
