Low density (800 to 1400 kg/m3), high workability (flowing and selfcompacting) and excellent thermal insulating properties (<0.5 W/mK) make foamed concrete attractive for many construction applications. This paper describes a laboratory study carried out at the University of Dundee looking into the development of thermally insulating foamed concrete suitable for trench fill foundations and ground-supported slabs for low-rise dwellings. In order to achieve this, a fine fly ash (7.5% ret 45u.m) was used to directly replace 30% by wt Portland cement and a coarse fly ash (26.0% ret 45um) to replace 50 or 100% by wt fine aggregate. The key thermal, engineering and permeation properties of a series of mixes are reported, which show that, indeed, foamed concrete offers builders many advantages over current construction methods and materials for this application

  • INTRODUCTION

  • FOAMED CONCRETE IN HOUSING FOUNDATIONS AND GROUND SLABS

  • EXPERIMENTAL PROGRAMME

  • MATERIALS AND MIX CONSTITUENT PROPORTIONS

  • PREPARATION OF LABORATORY FOAMED CONCRETE SPECIMENS

  • TEST PROCEDURES

  • THERMAL PERFORMANCE

  • ENGINEERING PROPERTIES

  • PERMEATION PROPERTIES

  • CONCLUSIONS

  • ACKNOWLEDGMENTS

  • REFERENCES

This content is only available via PDF.
You do not currently have access to this chapter.
Don't already have an account? Register

Purchased this content as a guest? Enter your email address to restore access.

Please enter valid email address.
Email address must be 94 characters or fewer.