– The purpose of this paper is to present a comparative study of the thermal behavior and efficiency of an induction motor fed by a fault-tolerant Three-Level Neutral Point Clamped (3LNPC) inverter, under normal conditions as well as after a post-fault reconfiguration, following an open-circuit fault in the inverter. For this purpose, a Matlab/Simulink model and three-phase induction motor models using a finite element method (FEM) software were developed. Besides, some experimental tests were conducted for different values of the induction motor load torque and speed reference to validate the models.
– To assess the thermal behavior and efficiency of the motor, electromagnetic and thermal models using a FEM software were developed. The coupling with the inverter drive is accomplished through a developed model in Matlab/Simulink which also includes the control system. The simulation tests were performed for a healthy and faulty inverter at different operating points of the three-phase induction motor. To validate the FEM models some experimental tests were performed.
– When the inverter operates in reconfigured mode the motor losses are higher and consequently temperature is higher and the motor efficiency is lower. The developed models are an alternative to a more detailed study of the motor when fed by a 3LNPC inverter and consequent optimization of the control system.
– With the developed tools, a better understanding of the motor behavior and performance is gained, allowing to forecast scenarios and optimize fault-tolerant control strategies for the drive.
