The purpose of this paper is to perform the simulation to explore the gap flow field under a hypersonic air flow. Thermal protection systems of hypersonic vehicles generally consist of thermal insulation tiles, and gaps between these tiles probably cause a severe local aerodynamic thermal effect.
The discretizations of convection flux term and temporal term in the governing equation with chemical equilibrium, respectively, take AUSM+-up flux-vector splitting scheme and the implicit lower-upper symmetric Gauss–Seidel method. Based on these, the flow field in a deep gap is simulated by means of the computer codes that the authors have written.
The numerical results show that the heat flux distribution in a gap has a good agreement with experimental results. Importantly, the distribution of heat flux is “U” shaped and the maximum of the heat flux occurs at the windward corner of a gap.
To explore the gap flow field under a hypersonic air flow, which is a chemically reacting, all speed and viscous flow, a novel model with an equivalent ratio of specific heats is presented. The investigation in this paper has a guide for the design of the thermal protection system in hypersonic vehicles.
