Skip to Main Content
Article navigation
Volume 7, Issue 3
1 March 1955
This article was originally published in
Scientific Lubrication
Scientific Lubrication Cover Image for Volume 7, Issue 3
Review Article| March 01 1955

EFFECT OF CYLINDER BORE FINISH AND ADDITIVES ON THE RUNNING‐IN OF ENGINES

Author & Article Information
Publisher: Emerald Publishing
Online ISSN: 2977-7224
Print ISSN: 0371-0947
© MCB UP Limited
1955
Scientific Lubrication (1955) 7 (3): 42–43.
https://doi.org/10.1108/eb052328

A paper presented to the Automobile Division of the Institution of Mechanical Engineers in February (and on which written communications are invited by the Institution before 7th April) by K.R. Williams, B.Sc. and Dr. S.G. Daniel, of Shell Research Ltd., dealt with the important problem of choice of cylinder bore finish and its relation to the use of additive lubricating oils.

This content is only available via PDF.
© MCB UP Limited
1955
You do not currently have access to this content.
Don't already have an account? Register

Purchased this content as a guest? Enter your email address to restore access.

Please enter valid email address.
Email address must be 94 characters or fewer.
Pay-Per-View Access
$41.00
Rental
This article is also available for rental through DeepDyve. Read this now at DeepDyve
116 Views
View Metrics
Simulation and experimental verification of vibration signals for bearing faults in the framework of digital twin
Exfoliation of MoS2 nanosheets via reaction–diffusion framework for enhanced boundary lubrication performance in crude Jatropha oil
Tribological properties and mechanisms of three kinds of hard thin films for semiconductor shear pin
Tribological improvement of magnesium alloy using solid lubricant with cerium oxide catalysis under heating treatment conditions

Suggested Reading

A Low Horse‐Power Engine: The Four‐Cylinder Horizontally‐opposed Continental Develops 35 h.p. at 2,500 r.p.m.
Aircraft Engineering (April,1931)
IT'S A MATTER OF HILLS AND VALLEYS
Industrial Lubrication and Tribology (January,1978)
Tribological behaviors and molecular spectroscopic characterization of a lubricated piston ring/cylinder bore sliding contact under stepwise heating conditions
Industrial Lubrication and Tribology (April,2002)
Automatic Bore‐Finishing Machines: A Type Growing in Favour Which Has Various Uses in Aero‐Engine Production
Aircraft Engineering (July,1936)
PRECISION IN DEEP BORING
Industrial Lubrication and Tribology (June,1984)

Related Chapters

CHAPTER IX DEEP BORING WITH DIAMOND DRILLS
WELL-BORING FOR WATER, BRINE AND OIL: A MANUAL OF CURRENT PRACTICE
Openness as Moderator between Feeling Bored and Managers' Decision-making Competence: A Study of Managers in the Retail Industry
Emotions and Service in the Digital Age
Repeated Lift-off Testing of Single Bore Multiple Anchors for Dam Retaining Wall over a 5-Year Period
Ground Anchorages and Anchored Structures in Service 2007: Proceedings of the two day international conference organised by the Institution of Civil Engineers and held in London on 26 and 27 November 2007

Recommended for you

These recommendations are informed by your reading behaviors and indicated interests.

Cited By

Google Scholar
This Feature Is Available To Subscribers Only

or Create an Account

Close Modal
Close Modal