Types of alkali–aggregate reactions and the products formed

The alkali–aggregate reaction comprises the alkali–silica reaction (ASR) and the alkali–carbonate reaction (ACR). Reaction kinetics of the ASR depends on the grain size and crystalline structure of the reactive silicon dioxide. The reaction starts in the aggregates along the particle periphery and progresses inward. After cracking of the particle, larger amounts of reaction products are formed and are eventually extruded in the cement paste, where they fill cracks and voids. ASR products within aggregates predominantly consist of (hydrated) silicon, alkalis and calcium with characteristic atomic ratios of (Na + K)/Si ∼ 0·25 and Ca/Si ∼ 0·25. They take up additional calcium while releasing alkalis when extruded. Amorphous and crystalline reaction products occur and coexist. Expansion is the result of water adsorption by the reaction products. In ACR, harmless dedolomitisation is distinguished from deleterious reaction of fine-grained silica disseminated throughout the carbonate matrix. Further research is needed to gain more in-depth knowledge about the thermodynamics and kinetics of ASR products and the mechanisms of expansion. This should allow the establishment of a better link between concrete structures and both accelerated testing and models.