Investigation on the use of ground alfa fibres as reinforcement of cement mortars

Alfa plants are endemic to the Maghreb, where they cover great areas and are of prime socio-economic interest. This study investigated use of the alfa plant in a fibre-reinforced cement composite for facade panels. Alfa fibres were ground in a knife mill, sieved through a 2 mm sieve and added to the mixture in different addition ratios (1, 2 and 3 vol%). The results showed that the incorporation of ground alfa fibres did not significantly influence the fresh properties of the mortar. Compared with a control mortar, there was a decrease of 4% in the workability of the mortar reinforced with 2 vol% of alfa fibres. An enhancement in flexural strength was observed for all three addition ratios, with the evolution of flexural strength linearly related to the increase of the fibre addition ratio. However, the compressive strength of the composites decreased with the addition of fibres, mainly due to the high porosity inside the matrix. This was confirmed by a capillary test, which showed that a high addition ratio led to high water absorption by capillary motion.