Implementation of chlorine dioxide disinfection: Effects of the treatment change on drinking water quality in a full-scale distribution system

Drinking water utilities may have to consider changing disinfectant to improve water quality and meet more stringent disinfection regulations. The objective of this study was to evaluate the response of a full-scale drinking water distribution system to a change in disinfectant from chlorine to chlorine dioxide, in terms of its impact on microbiological stability and disinfection by-product formation. Chlorine dioxide residuals were consistently present above detection limits throughout the distribution system (>0.20 mg/L). Over a study period of 3.5 months, no degradation of bacterial water quality occurred after implementing the new disinfectant. Chlorine dioxide maintained total bacteria (microscopic counts) and heterotrophic plate count levels below 2 x 10⁵ cells/mL and 1000 CFU/mL, respectively. The change in disinfectant from chlorine to chlorine dioxide led to an 85% reduction in trihalomethanes (i.e., from 30 to 5 μμg/L) and a 60% reduction in haloacetic acids (i.e., from 20 to 8 μμg/L). Chlorine dioxide represents a valuable tool to produce high quality water and is a strong alternative to chlorine for certain distribution systems. Key words: distribution system, chlorine dioxide, drinking water quality, disinfection by-products.