Open figure viewer
A detailed protocol is presented documenting how a ‘sensor factor’ correction should be calculated when undertaking quasi collimated beam experiments using a polychromatic medium pressure ultraviolet lamp. The correction factor was determined as 0.778 through Pyrex filtration test. This new protocol is particularly important if the radiometer sensor has significant sensitivity at wavelengths longer than 300 nm.
Keywords:
faisceau collimaté,
ultraviolet,
UV,
désinfection,
radiomètre,
environment,
collimated beam,
ultraviolet,
UV,
disinfection,
radiometer
2008
You do not currently have access to this content.
