... 2026 © 2026 Emerald Publishing Limited 2026 Emerald Publishing Limited Licensed re-use rights only diatom shape diatom soil geomaterial characterisation geotechnical engineering laboratory tests modulus degradation curve shear modulus shear strength soil classification...

.... The lake reflects the mountain face and the sky above, which is mostly clear with a few clouds. The image conveys a sense of landscape management and ecological restoration in a mountainous environment. geotechnical engineering hydrogen storage lined rock caverns numerical numerical methods...

... Publishing Limited 2025 Emerald Publishing Limited Licensed re-use rights only UN SDG 7: Affordable and clean energy UN SDG 9: Industry, innovation and infrastructure anchors and anchorages centrifuge modelling geotechnical engineering models (physical) offshore renewable energy Sands...

... © 2025 Emerald Publishing Limited 2025 Emerald Publishing Limited Licensed re-use rights only Combined thermal-mechanical effects Constitutive relations Geomaterial characterisation Geotechnical engineering Post-peak morphology Rocks Rock mechanics Stress analysis Thermal behaviour...

... increases interparticle friction. This mechanism is termed the ‘friction–extrusion effect’. The interplay of dry–wet cycling and cyclic loading is shown to significantly accelerate rock fatigue failure. crack and cracking fatigue geotechnical engineering rocks rock mechanics The National Key...

...F. Patino-Ramirez; C. O'Sullivan Data gathered from 65 922 articles published in 30 geotechnical engineering journals between 1998 and 2022 were used to build a topic model and study the evolution of research output in the field. Over this period, the number of journal publications has grown...

...: (a) outlet; (b) cross-section of the cable showing the flow channel; (c) fluid flow test and (d) flow ( Δ h = 40 cm, L_d =  5·5 m) 15 04 2023 29 08 2023 Emerald Publishing Limited: All rights reserved 2023 geotechnical engineering grouting...

... of strain rates and can be used for more consistent evaluation of rate effects between studies. clays geotechnical engineering laboratory tests An understanding of rate effects is key to the analysis of a wide range of geotechnical problems where high strain rates are present, ranging from cone...

... 2022 anchors & anchorages design geotechnical engineering Split sets, which are popular friction rock bolts, integrate into a rock mass through interface friction. Split sets, which are in the form of a tube with a C-shaped cross-section (Scott, 1973 ; Davis, 1979 ; Li, 2017...

...: 1836–1900 . Int. J. Hist. Engng Technol.   81 , No. 1 , 108 – 128 , 10.1179/175812109x12547332391989 . Lutenegger , A. (2011b). Behavior of multi-helix screw anchors in sand . In Proceedings of the 14th Pan-American conference on geotechnical engineering , pp. 1 – 6 . Toronto, Canada...

... shear strength ratio less than unity generally turns out to be relatively moderate. 11 08 2015 03 10 2015 03 11 2015 ICE Publishing: all rights reserved 2016 clays geotechnical engineering solid mechanics In this paper, such an equivalent undrained failure criterion...

...Jean-Michel Pereira; Frank Wuttke; J. Carlos Santamarina ICE Publishing: all rights reserved 2014 geotechnical engineering Increasing energy demand and environmental concerns related to climate change prompt further developments in energy conservation and efficiency...

..., with new members from all continents, confirming the international dimension of the journal. ICE Publishing: all rights reserved 2014 geotechnical engineering This is my first year as Editor of Géotechnique Letters. I am Professor of Geotechnical Engineering at Ecole des Ponts...

...Béatrice A. Baudet; Jean-Michel. Pereira geotechnical engineering Just one month ago a group of experts interested in the micro-mechanics of soils came from different locations around the world to participate in a workshop that was both informal and informative. We heard inspiring...

...   B. H. , Lam   S. Y. . Laboratory measurement of strength mobilisation in kaolin: link to stress history. Géotech. Lett. , 2012 , 2 , 9 – 15 , 10.1680/geolett.12.00003 . ICE Publishing: all rights reserved 2013 geotechnical engineering As a journal Editor, I find...

... simply changes in soil mineralogy. 11 1 2013 11 1 2013 ICE Publishing: all rights reserved 2013 geotechnical engineering While Vardanega et al. (2012) present an interesting empirical power law relationship for representing the stress–strain response of clays...

...M. B. Cil; K. A. Alshibli; G. R. Mcdowell; H. Li 9 1 2013 9 1 2013 ICE Publishing: all rights reserved 2013 geotechnical engineering The article by Cil & Alshibli gives each agglomerate a single bond strength, which is taken from a normal distribution of mean 475...

...D. Muir Wood; D. Lesniewska 19 11 2012 26 11 2012 ICE Publishing: all rights reserved 2012 geotechnical engineering I would like to make some comments in relation to the paper by David Muir Wood (Muir Wood, 2012), who, in my opinion, asks certain questions...

... , Clarendon Press , Oxford . ICE Publishing: all rights reserved 2012 geotechnical engineering Research is best directed towards problems that are difficult to frame. That is why geomechanics proved to be a popular and productive arena for research effort during the twentieth century...

... is deemed to be less important, are larger. ICE Publishing: all rights reserved 2012 geotechnical engineering Research trends are regularly driven by the availability of tools, and we often choose ‘convenient materials’ to help us reveal conclusive new results. However, we should...