This paper studies the seismic response of reinforced soil retaining walls through shaking table tests. The effect of the container boundary on the behaviour of model retaining walls subjected to dynamic base excitation is examined. Two types of containers, a rigid container made of a perspex sheet and a flexible laminar container were used in the tests. Model tests on wrap-faced and rigid-faced reinforced soil walls and unreinforced rigid-faced walls are discussed in detail, including their construction, instrumentation and results of dynamic tests on a shaking table. Horizontal face displacements and accelerations are analyzed to examine the influence of the container boundary on the performance of the walls. From the results, it is observed that the flexible boundary laminar container allows more displacement and larger accelerations compared to the rigid perspex container. Since the soil in a rigid wall container cannot deform as it would in the field and a strain dissimilarity results between the model and the prototype, the response of model walls tested in the flexible container is believed to be more reliable than that of walls tested in the rigid container.
Article navigation
December 2009
Research Article|
December 01 2009
Container boundary effects in shaking table tests on reinforced soil wall models
A. Murali Krishna;
A. Murali Krishna
Ph.D. Assistant Professor
Department of Civil Engineering, Indian Institute of Technology Guwahati, Guwahati 781039, India
Search for other works by this author on:
G. Madhavi Latha
G. Madhavi Latha
Ph.D. Associate Professor
Depanment of Civil Engineering, Indian Institute of Science, Bangalore 560012, India
Search for other works by this author on:
Publisher: Emerald Publishing
Received:
October 25 2007
Online ISSN: 2042-6550
Print ISSN: 1346-213X
© Thomas Telford and ICE
2009
International Journal of Physical Modelling in Geotechnics (2009) 9 (4): 01–14.
Article history
Received:
October 25 2007
Citation
Krishna AM, Latha GM (2009), "Container boundary effects in shaking table tests on reinforced soil wall models". International Journal of Physical Modelling in Geotechnics, Vol. 9 No. 4 pp. 01–14, doi: https://doi.org/10.1680/ijpmg.2009.090401
Download citation file:
New and popular articles
Suggested Reading
Seismic behaviour of rigid-faced reinforced soil retaining wall models: reinforcement effect
Geosynthetics International (October,2009)
Seismic response of wrap-faced reinforced soil-retaining wall models using shaking table tests
Geosynthetics International (December,2007)
Efficiency of modal analysis to compute the seismic response of dam—foundation systems with non—proportional damping
Engineering Computations (April,1995)
Reinforcement of railway ballasted track with geosynthetic bags for preventing derailment
Geosynthetics International (October,2013)
Development and performance of an active type shear box in a centrifuge
International Journal of Physical Modelling in Geotechnics (June,2001)
Related Chapters
Determination of Shear Strength Parameters of Tire Chips and Grains
5th ICEG Environmental Geotechnics: Opportunities, Challenges and Responsibilities for Environmental Geotechnics: Proceedings of the ISSMGE’s fifth international congress organized by the Geoenvironmental Research Centre, Cardiff University and held at Cardiff City Hall on 26–30th June 2006
Turning segmental tunnels into sources of renewable energy
ICE Themes Smart Concrete
Overview of machine learning in civil engineering
Machine Learning in Civil Engineering and Infrastructure Development: A Practitioner's Handbook
Recommended for you
These recommendations are informed by your reading behaviors and indicated interests.
