Fast falling weight deflectometer as new tool to perform accelerated pavement testing Available to Purchase

The development of the falling weight deflectometer (FWD) in the late 1970s made it possible to determine quickly the in situ modulus and critical stresses/strains in pavement structures, which are generally considered the most important input for the ‘mechanistic’ part of the mechanistic–empirical pavement design method. In 2015, the newly designed FastFWD was released and provided the opportunity to speed up the testing procedure and overall productivity significantly. The increased rate of loading prompted the current study into the possibility of performing in situ accelerated pavement testing to predict pavement deterioration, and to fill the gap between the heavy vehicle simulator and small-scale laboratory test methods. Numerous experimental sequences and test sites have been initiated since the start of the research; in the last of these, 1·6 million load applications were applied and the dynamic modulus master curve was back-calculated and used to filter out the viscoelastic response of the asphalt layer caused by temperature changes within the material from the repeated loading. Based on the findings of this research, an incremental-recursive fatigue model has been used to predict accurately the reduction in asphalt modulus as a function of any combination of loads and temperatures for a known material.