Skip to Main Content
Article navigation
Volume 11, Issue 1
1 January 1994
This article was originally published in
Hybrid Circuits
Hybrid Circuits Cover Image for Volume 11, Issue 1
Review Article| January 01 1994

Bi/Pb‐Sr‐Ca‐Cu‐0 Based Thick Film Superconductors on Various Metal Substrates Available to Purchase

M. Hrovat;
M. Hrovat
Jožef Stefan Institute, University of Ljubljana, Ljubljana, Slovenia
Search for other works by this author on:
This Site
PubMed
Google Scholar
S. Bernik;
S. Bernik
Jožef Stefan Institute, University of Ljubljana, Ljubljana, Slovenia
Search for other works by this author on:
This Site
PubMed
Google Scholar
M. Rozman;
M. Rozman
Jožef Stefan Institute, University of Ljubljana, Ljubljana, Slovenia
Search for other works by this author on:
This Site
PubMed
Google Scholar
D. Kolar
D. Kolar
Jožef Stefan Institute, University of Ljubljana, Ljubljana, Slovenia
Search for other works by this author on:
This Site
PubMed
Google Scholar
Author & Article Information
Publisher: Emerald Publishing
Online ISSN: 2977-7062
Print ISSN: 0265-3028
© MCB UP Limited
1994
Hybrid Circuits (1994) 11 (1): 12–14.
https://doi.org/10.1108/eb044517

Thick film superconductors with the nominal composition Bi2Pb0.5Sr2Ca2.5Cu3.5Ox were fired on stainless steel substrates and on alumina substrates covered with silver or gold thick film conductors. Films on stainless steel substrates were semiconducting due to reaction between the superconducting film and oxidised chromium and iron from the steel. Tc(R=0) of films on silver was between 80 K and 90 K while Tc (R=0) on gold was below 60 K. The low Tc (R=0) of films on gold is attributed to the interaction between the gold layer and copper from the superconductor.

This content is only available via PDF.
© MCB UP Limited
1994
You do not currently have access to this content.
Don't already have an account? Register

Purchased this content as a guest? Enter your email address to restore access.

Please enter valid email address.
Email address must be 94 characters or fewer.
Pay-Per-View Access
$41.00
Rental
This article is also available for rental through DeepDyve. Read this now at DeepDyve
111 Views
View Metrics
A study on surface tension prediction of Sn-based lead-free solder via machine learning algorithms
Dual-mode virtual inertia and damping control scheme for cascaded H-bridge converter-based BESS with enhanced frequency support ability
Guest editorial: Advanced sensing and control techniques for safety enhancement of power electronics components and systems in renewable energy applications-Part 1
Design of reconfigurable liquid crystal holographic antenna fed by a slow-wave rectangular waveguide

Suggested Reading

Interactions between Thick Film Superconductors and Various Metal Substrates
Hybrid Circuits (January,1992)
Validation of a 3D macroscopic model for superconductors
COMPEL (June,2005)
Evaluation of the magnetic field – high temperature superconductor interactions
COMPEL (March,2004)
Observing the Percolation Effect in Thick Film Superconductors
Hybrid Circuits (January,1994)
Fabrication and Electrical Characterisation of Superconductor‐on‐Silicon Devices
Hybrid Circuits (March,1994)

Related Chapters

Green Technology and the Circular Economy: Towards a Sustainable Future
TOKAMAK AS A POSSIBLE FUSION REACTOR – COMPARISON WITH OTHER C.T.R. DEVICES
Nuclear fusion reactors
7. The civil engineer's role in energy policy decision
Joint ICE/ASCE/CSCE Conference: Introductory Notes: Engineering Future Decisions

Recommended for you

These recommendations are informed by your reading behaviors and indicated interests.

Cited By

Google Scholar
This Feature Is Available To Subscribers Only

or Create an Account

Close Modal
Close Modal