The present experiments are intended to help characterize defects in very thin MOS oxide and at its Si/SiO2 interface using a temperature‐dependent electrical characterization method, high low temperature capacitance voltage method and, especially, to investigate high temperature range. Oxide‐fixed traps are differentiated from slow‐state traps and from fast‐state traps by evaluating their electrical behaviour at different temperatures. The analysis points out the excess current after Fowler Nordheim electron injection based on hole generation, trapping, and hopping transport at high temperatures. The defect relaxation property versus temperature is investigated and defect relaxation activation energies are calculated. Creation mechanisms of interface states are especially identified by injection at different temperatures and these are compared with the other two kinds of defects. Fast‐state traps and all defect cross‐sections are calculated along and their creation activation energies are determined from Arrhenius plots.
Article navigation
1 August 2003
Research Article|
August 01 2003
Defect evolutions with different temperature injections in MOSFETs
Jean‐Yves Rosaye;
Jean‐Yves Rosaye
Nagoya University, Nagoya, Japan
Search for other works by this author on:
Pierre Mialhe;
Pierre Mialhe
Perpignan University, Perpignan, France
Search for other works by this author on:
Jean‐Pierre Charles
Jean‐Pierre Charles
Metz University, Metz, France
Search for other works by this author on:
Publisher: Emerald Publishing
Online ISSN: 1758-812X
Print ISSN: 1356-5362
© MCB UP Limited
2003
Microelectronics International (2003) 20 (2): 24–31.
Citation
Rosaye J, Mialhe P, Charles J (2003), "Defect evolutions with different temperature injections in MOSFETs". Microelectronics International, Vol. 20 No. 2 pp. 24–31, doi: https://doi.org/10.1108/13565360310472176
Download citation file:
New and popular articles
Suggested Reading
Synthesis and characterisation of chromium oxide as a pigment for high temperature application
Pigment & Resin Technology (June,2003)
A phenomenological mathematical model of hysteresis
COMPEL (December,2001)
Hysteresis loop modeling techniques and hysteresis loss estimation of soft magnetic materials
COMPEL (December,2001)
Determination of the distribution function of Preisach’s model using centred cycles
COMPEL (December,2000)
Vector hysteresis model based on neural network
COMPEL (September,2003)
Related Chapters
DESIGN OF MECHANICAL-PHYSICAL PROPERTIES OF LAID FLOORS WITH CONSIDERATIONS OF THE NATURE OF INTRODUCED FILLERS AND ADMIXTURES
Concrete Floors And Slabs: Proceedings of the International Seminar held at the University of Dundee, Scotland, UK on 5–6 September 2002
Recommended for you
These recommendations are informed by your reading behaviors and indicated interests.
