Skip to Main Content
Article navigation
Volume 23, Issue 4
1 April 1994
Pigment & Resin Technology Cover Image for Volume 23, Issue 4
Review Article| April 01 1994

Mini articles Available to Purchase

Author & Article Information
Publisher: Emerald Publishing
Online ISSN: 1758-6941
Print ISSN: 0369-9420
© MCB UP Limited
1994
Pigment & Resin Technology (1994) 23 (4): 17–21.
https://doi.org/10.1108/eb043117

Moldflow is fundamental to the concept of Granular Injected Paint Technology (GIPT) for in‐mould painting of injection moulded parts which is at present in an advanced state of development. Funded by the EPIC club of 25 companies, the work is being carried out at the Rover Advanced Technology Centre at Warwick University.

This content is only available via PDF.
© MCB UP Limited
1994
You do not currently have access to this content.
Don't already have an account? Register

Purchased this content as a guest? Enter your email address to restore access.

Please enter valid email address.
Email address must be 94 characters or fewer.
Pay-Per-View Access
$41.00
Rental
This article is also available for rental through DeepDyve. Read this now at DeepDyve
123 Views
View Metrics
Synthesis of natural nano binder from palm oil utilizing sustainable energy and its application in textile printing
Radiation-assisted development of GMA/styrene coatings: enhanced chemical and mechanical properties via nanoclay reinforcement
The piezo-photocatalytic synergistic effect of cement-based material coating based on BaTiO3/Bi2O3
Stability enhancing techniques for naturally sourced dyes and pigments

Suggested Reading

Optimization of plastic injection molding process by dual response surface method with non‐linear programming
Engineering Computations (November,2010)
Using metallic resin and aluminum alloy molds to manufacture propellers with RP/RT technique
Rapid Prototyping Journal (March,2008)
Additive manufacturing of conformal cooling channels for improved injection molding performance
Rapid Prototyping Journal (November,2025)
The Simulation Study of the Effect of Single and Double Gated Molds on Pressure and Temperature in Injection Molding of Polymeric Composite Clutch Pedals
Multidiscipline Modeling in Materials and Structures (March,2006)
Achieving agility in manufacturing through finite element mould analysis: An application‐oriented research
Journal of Manufacturing Technology Management (June,2010)

Related Chapters

Pedestrian facilities at mini-roundabouts
Pedestrian Facilities: Geometric design for safety and mobility
10 Pedestrian facilities at mini-roundabouts
Pedestrian facilities: Engineering and geometric design
Using Mini-Cases to Develop AICPA Core Competencies
Advances in Accounting Education: Teaching and Curriculum Innovations

Recommended for you

These recommendations are informed by your reading behaviors and indicated interests.

Cited By

Google Scholar
This Feature Is Available To Subscribers Only

or Create an Account

Close Modal
Close Modal