Feasibility of Some Lead‐free Solder Alloys as Filler Materials for Z‐axis Adhesives

Polyester connector strips were joined to polyimide substrates with anisotropic electrically conductive adhesives. Copper conductors as well as Au/Ni‐coated copper conductors were used on flexible circuits. The adhesives were composite materials consisting of heat curing, one‐component epoxy resin and powdered ternary solder alloys: tin‐bismuth‐zinc, tin‐indium‐zinc and tin‐zinc‐aluminium. An adhesive filled with eutectic tin‐bismuth alloy powder was used as reference. The effect of bonding parameters (e.g., temperature, dwell time and pressure) on contact resistance values was evaluated. The contact resistance values were measured for evaluating the reliability of adhesive joints during a 60°C/95%RH test. Furthermore, the joint microstructures were examined with optical and scanning electron microscopy. The results showed that with the copper conductors the initial contact resistance values were lower than with the Au/Ni‐coated copper conductors. The most reliable joints were produced with low melting filler alloys (with respect to bonding temperature) on bare copper metallisation. The most likely reason for failure of the Au/Ni‐coated circuits was strong oxidation of locally exposed nickel in the presence of moisture.