This paper aims to present experimental work examining the effect of opening size on the collection efficiency of cavity-type receiver geometries, e.g. modified cavity and spherical cavity with single- as well as dual-stage water heating. The correlations, obtained using the experimentally obtained data, are helpful in designing of cavity receivers (modified and spherical geometry type) to be used in solar-power harnessing assignments/projects, for yielding better system performance.
The parameters of study encompass receiver opening or aperture ratios (d/D, ratio of diameter of opening to the maximum diameter of spherical cavity) of 0.4, 0.47, 0.533 and 0.6; flow Reynolds numbers of 938, 1,175, 1,525 and 1,880 with water as a coolant; and receiver inclination angles of 90, 60, 45 and 30° (with 90° as receiver-opening facing downward and 30° as receiver-aperture facing closer to sideway). A modified cavity receiver was examined for opening ratios of 0.46, 0.6, 0.7 and 0.93. The glass covers, with thickness 2, 4 and 6 mm, were positioned at the opening of cavity to mitigate the energy losses.
The experiments have been conducted at a lesser incoming radiative heat flux, for receiver cavity wall surface temperatures ranging from 90°C to 180°C. The collection efficiency values of both the receivers, modified cavity and spherical cavity types, are seen increasing with coolant flow rate and receiver tilt (inclination) angles, i.e. 30° → 90°. The collection efficiency exhibits maxima at an opening ratio of 0.533 in case of both single- and double-stage spherical cavity receiver. This value was observed as 0.6 for modified cavity receiver. The mathematical correlations developed for obtaining the collection efficiency values of modified cavity-type receiver, spherical cavity receiver with single stage and spherical cavity receiver with dual-stage water heating are given as , and , respectively.
The findings of the paper may be helpful in erecting concentrating solar collector systems for household water heating, concentrating solar-based power generation as well as for various agricultural applications.
The experimental investigations are fewer in the literature examining the combined geometrical influence on the efficiency of cavity receivers with single- and double-stage water heating provisions.
