Whiteness and absorbency of hydroentangled cotton-based nonwoven fabrics of different constituent fibers and fiber blends Available to Purchase

The aim of this research is to develop greige (raw/non-bleached) cotton-containing nonwoven fabrics that likely would be competitive in quality, cost and performance to existing products that presently and predominantly use man-made fibers and some bleached cotton for wipes and other similar end-use nonwoven products. Since the whiteness and absorbency of these end-use products generally are the most desired and perhaps even critical attributes, the research was mainly focused on attaining these attributes by exploring various choices and optimum use of a variety of cost-effective cotton fibers and the blends thereof with other fibers. Nonwoven fabrics were produced, via a modern hydroentanglement system, with possible choices of using several types of cotton fibers, including the greige cotton lint and certain of its co-products such as gin motes and comber noils, and their various blends with polyester and nylon staple fibers. Bleached cotton was also used to produce an equivalent fabric for comparison. The research has shown that although the desired and perhaps critical properties of whiteness and absorbency of the selected fibers vary considerably among the various fabrics produced, the blends of greige cotton lint with man-made fibers can provide the fabric whiteness and absorbency comparable to those of say, a, bleached cotton fabric. The research results suggest that the greige cotton lint and/or its co-products in blend with polyester fiber may be sensible approaches to the development of functionally acceptable nonwoven wiping products that are also environment friendly.