Three types of fillers were incorporated in the thermoplastic natural rubber by melt blending process. They are NiZn ferrite, multiwalled carbon nanotubes, and hybrid NiZn ferrite/multiwalled carbon nanotubes followed by weight ratio of 1:1. Their magnetic properties and microwave absorbing properties were investigated. The ball-milled techniques, resulted good filler dispersion in hybrid nanocomposite, proven by the matching saturation magnetization experimental values with the theory calculation. It was found that the magnetic property strongly depends on the amount of magnetic particles in the nanocomposites. The mixing of two different types of filler (multiwalled carbon nanotubes and NiZn ferrite) showed an enhancement of the microwave properties at lower filler loading.
Article navigation
1 August 2014
Research Article|
August 01 2014
Comparison of magnetic and microwave absorbing properties between multiwalled carbon nanotubes nanocomposite, nickel zinc ferrite nanocomposite and hybrid nanocomposite
L. Yu;
L. Yu
1
Kuala Lumpur Campus (North Wing), UCSI University, Lot 12734, Jalan Choo Lip Kung, Taman Tayton View, 56000 Cheras, Kuala Lumpur, Malaysia
Search for other works by this author on:
S. Ahmad;
S. Ahmad
2
School of Applied Physics, Faculty of Science and Technology, Universiti Kebangsaan Malaysia, 43600 Bangi, Selangor, Malaysia
Search for other works by this author on:
Sivanesan Appadu;
Sivanesan Appadu
3
Department of Technology Processing Radiation, Nuclear Agency of Malaysia, 43000 Bangi, Selangor, Malaysia
Search for other works by this author on:
I. Kong;
I. Kong
4
Department of Mechanical, Materials and Manufacturing Engineering, University of Nottingham Malaysia Campus, Jalan Broga, 43500 Semenyih, Selangor, Malaysia
Search for other works by this author on:
Mou'ad Tarawneh;
Mou'ad Tarawneh
2
School of Applied Physics, Faculty of Science and Technology, Universiti Kebangsaan Malaysia, 43600 Bangi, Selangor, Malaysia
Search for other works by this author on:
Moayad Flaifel
Moayad Flaifel
2
School of Applied Physics, Faculty of Science and Technology, Universiti Kebangsaan Malaysia, 43600 Bangi, Selangor, Malaysia
Search for other works by this author on:
Publisher: Emerald Publishing
Online ISSN: 2515-8082
Print ISSN: 1708-5284
World Journal of Engineering (2014) 11 (4): 317–322.
Citation
Yu L, Ahmad S, Appadu S, Kong I, Tarawneh M, Flaifel M (2014), "Comparison of magnetic and microwave absorbing properties between multiwalled carbon nanotubes nanocomposite, nickel zinc ferrite nanocomposite and hybrid nanocomposite". World Journal of Engineering, Vol. 11 No. 4 pp. 317–322, doi: https://doi.org/10.1260/1708-5284.11.4.317
Download citation file:
Sign in
Don't already have an account? Register
ICE Member Sign In
Log inPurchased this content as a guest? Enter your email address to restore access.
Please enter valid email address.
Email address must be 94 characters or fewer.
Pay-Per-View Access
$41.00
Rental
This article is also available for rental through DeepDyve.
New and popular articles
Suggested Reading
An improved multiscale energy model based on parallel computing and magnetic property modeling in the electrical steel sheet
COMPEL (April,2026)
An experimental study on characterizing damage and fracture of a rock-like material based on three-dimensional magnetic field imaging
Engineering Computations (October,2020)
Recommended for you
These recommendations are informed by your reading behaviors and indicated interests.
