This study aims to reduce the warping deformation of the stainless composite plate after removal strake by using a finite element method. A three-dimensional thermo-mechanical coupled elastic-plastic finite element model has been suggested by using ABAQUS to simulate the multi-pass hot rolling of stainless composite plate.
A three-dimensional thermo-mechanical coupled elastic-plastic finite element model has been suggested by using ABAQUS to simulate the multi-pass hot rolling of stainless composite plate. Warping deformation rules of 316L/Q345R stainless composite plate after removal strake have been analyzed. Moreover, the influences of some different rolling parameters on this deformation have been discussed.
The warping deformation just varies in the range of cladding ratio from 0.1 to 0.25. Therefore, cladding ratio does not have a great influence on warping deformation.
The results show that higher heating temperature, larger final thickness and less rolling passes are beneficial for reducing the warping deformation.
