This paper aims to discuss the scanning methodology depending on the close-range photogrammetry technique, which is appropriate for the precise three-dimensional (3D) modelling of objects in millimetres, such as the dimensions and structures in sub-millimetre scale.
The camera was adjusted to be tilted around the horizontal axis, while coded dot targets were used to calibrate the digital camera. The experiment was repeated with different rotation angles (5°, 10°, 15°, 20°, 25°, 30°, 50° and 60°). The images were processed with the PhotoModeler software to create the 3D model of the sample and estimate its dimensions. The features of the sample were measured using high-resolution transmission electron microscopy, which has been considered as a reference and the comparative dimensions.
The results from the current study concluded that changing the rotation angle does not significantly affect the results, unless the angle of imagery is large which prevent achieving about 20: 30% overlap between the images but, the more angle decreases, the more number of images increase as well as the processing duration in the programme.
Develop an automatic appropriate for the precise 3D modelling of objects in millimetres, such as the dimensions and structures in sub-millimetre scale using photogrammetry.
