The paper deals with methods of tailoring magnetic properties of soft and hard magnetic composites. Comparison of magnetic properties of injection moulding and compression moulding Nd-Fe-B magnets are presented. Magnetic properties of Nd-Fe-B bonded magnets were tailored by different ways such as: amount of resin, addition of barium ferrite, Al or Fe powders. Influence of technological parameters such as compression pressure, time and temperature of curing on magnetic parameters of Nd-Fe-B bonded magnets are presented in the paper. Magnetic properties of soft magnetic composites made of Fe, Ni, Co are presented in the paper. Influence of technological parameters such as compression pressure, time and temperature of curing on magnetic parameters of iron soft magnetic composites are presented also in the paper.
Article navigation
1 March 2011
Research Article|
March 01 2011
Hard and soft magnetic composites with modified magnetic properties
B. Ślusarek;
B. Ślusarek
1
Tele and Radio Research Institute, Ratuszoawa 11 St., 03-450 Warsaw, Poland
Search for other works by this author on:
M. Przybylski
M. Przybylski
1
Tele and Radio Research Institute, Ratuszoawa 11 St., 03-450 Warsaw, Poland
Search for other works by this author on:
Publisher: Emerald Publishing
Online ISSN: 2515-8082
Print ISSN: 1708-5284
World Journal of Engineering (2011) 8 (1): 87–92.
Citation
Ślusarek B, Przybylski M (2011), "Hard and soft magnetic composites with modified magnetic properties". World Journal of Engineering, Vol. 8 No. 1 pp. 87–92, doi: https://doi.org/10.1260/1708-5284.8.1.87
Download citation file:
Sign in
Don't already have an account? Register
ICE Member Sign In
Log inPurchased this content as a guest? Enter your email address to restore access.
Please enter valid email address.
Email address must be 94 characters or fewer.
Pay-Per-View Access
$41.00
Rental
This article is also available for rental through DeepDyve.
Suggested Reading
Modelling the effect of compaction pressure on hysteresis curves of self-developed SMC cores
COMPEL (April,2019)
Experimental studies on magnetorheological brake containing plane, holed and slotted discs
Industrial Lubrication and Tribology (March,2017)
Effects of peak laser power on laser micro sintering of nickel powder by pulsed Nd:YAG laser
Rapid Prototyping Journal (June,2014)
Analysis of high speed permanent magnet motor with powder core material
COMPEL (September,2012)
Study on micro-arc oxidation coating of magnetic metal powder composite magnesium alloy
Anti-Corrosion Methods and Materials (August,2020)
Recommended for you
These recommendations are informed by your reading behaviors and indicated interests.
