... the typically adverse effects of increasing layer height, where larger voids are expected; in contrast, the proposed gap-filling technique utilizes the increased gap size to accommodate larger gap-filling filaments. The proposed approach also demonstrates strong potential for improving mechanical properties due...

... behavior. This study aims to explore this previously under-investigated combination and to evaluate its mechanical performance under controlled experimental conditions. This study addresses this gap by studying the physico-mechanical properties of loaded dune sand concrete (LDSC). LDSC is defined as a sand...

...-based materials. CNT and AO are shown in Figure 1 . The mechanical properties of the CNT and AO are tabulated in Table 1 . Here, the thermal conductivity is 3,000–6,000 W/m/k (Jia et al., 2024). The values provided in this table are received from the experimental analysis...

... with enhanced mechanical properties with 20% replacement ratio (Xu et al., 2022). Porous ceramic waste aggregate with self-curing method that reduced the deleterious effects of high temperature on density loss and compressive strength with optimum of replacement of 25% (Amin et al., 2021...

... (fiber type and diameter, yarns linear densities, weave pattern and thread count), mechanical properties (tensile strength, bursting strength, bagging behavior, abrasion resistance) and air permeability. The ultimate goal is to identify the most effective fabric parameters for filtration applications...

...., 2023). Industries such as aerospace and aircraft, biomedical, consumer goods, architectural models, smart homes, animation and automotive sectors all use this technique. The mechanical properties of three-dimensionally printed (3DP) parts are extremely important for prototyping(Jo et al., 2018...

... can be contacted at: khungarhp@rknec.edu 15 06 2024 27 08 2024 10 10 2024 © 2025 Emerald Publishing Limited 2025 Emerald Publishing Limited Licensed re-use rights only Mechanical properties Microstructural analysis Nanoparticles Recycled aggregate Titanium...

... on mechanical properties and mass loss when exposed to acidic solutions (H2SO4 5% and HCl 5%) over periods of 28, 90 and 180 days. The study seeks to develop SCSC technology by taking advantage of locally available sand resources. Design/methodology/approach Using an experimental design, the study explores...

...Ayush Ayush; Saurabh Dewangan; Sidhant Ishwar; Ayush Agarwal Purpose The purpose of this study is to find the effect of heat treatment on the mechanical proeprties of aluminum. Aluminum exhibits a good response to heat treatment, especially quenching, according to the mechanical property...

... for thermoplastic composites reinforced with glass and jute fibers at various fiber contents (20, 30 and 40 Wt. %). Design/methodology/approach The research used both glued and unglued carpet wastes to examine the effect of adhesive impurities on composite properties. The mechanical properties of the composites...

...Chinmaya Prasad Padhy; Suryakumar Simhambhatla; Debraj Bhattacharjee Purpose This study aims to improve the mechanical properties of an object produced by fused deposition modelling with high-grade polymer. Design/methodology/approach The study uses an ensembled surrogate-assisted evolutionary...

... by preparing nine mixes of concrete, involving different ratios of aluminum waste powder and polystyrene beads as 0%, 0.2% and 0.3% and 0%, 0.1% and 0.2%, respectively, by weight of cement to produce the lightweight concrete with different densities. The performance of mechanical properties, thermal...

... 2024 © Emerald Publishing Limited 2024 Emerald Publishing Limited Licensed re-use rights only Natural fiber Mechanical properties Kenaf fiber Hybrid composite Acacia concinna The increased energy required to make things comprised of nonrenewable components is now...

...Prathamesh Pawar; Sudhir Patil; Sandeep Sathe Purpose This study investigated the potential of partially replacing cement with red mud (RM) in concrete and examined its effects on its mechanical properties and microstructure. This study aims to explore sustainable alternatives to traditional...

... G3468 specifications. The joining of pipe interconnections, bends, Tees, valves, equipment such as pumps/compressors and fabrication of vessels, etc., to put up networks is primarily done by GTAW. Pipe welding Friction stir welding FSW parameters Mechanical properties Friction stir...

...Mohamed El Boukhari; Ossama Merroun; Chadi Maalouf; Fabien Bogard; Benaissa Kissi Purpose The purpose of this study is to experimentally determine whether mechanical properties of concrete can be improved by using olive pomace aggregates (OPA) as a substitute for natural sand. Two types of OPA...

...Mandeep Singh; Khushdeep Goyal; Deepak Bhandari Purpose The purpose of this paper is to evaluate the effect of titanium oxide (TiO₂) and yttrium oxide (Y₂O₃) nanoparticles-reinforced pure aluminium (Al) on the mechanical properties of hybrid aluminium matrix...

... microscopy and optical microscopy and X-ray diffraction were used to examine the macro and micro-structural characteristics, as well as the fracture surfaces, of tensile specimens. The mechanical properties (tensile, hardness tests) of the base metal and the welded specimens under a variety of situations...

... on high carbon steel bars Charnnarong Saikaew can be contacted at: charn_sa@kku.ac.th 08 10 2022 16 01 2023 05 03 2023 © Emerald Publishing Limited 2023 Emerald Publishing Limited Licensed re-use rights only Mechanical properties WC–Co High velocity oxy-fuel...

.... The compressive, indirect tensile and flexural strengths; electrical resistivity; and water absorption were evaluated in this study. Findings The results showed that the addition of both steel and PO fibers led to improvements in the mechanical properties of FRC and HFRC. However, the replacement of steel...