Revised standards and technical reports
Revised standards and technical reports
Keywords: NACE, Standards
NACE International has published several new and revised standard recommended practices and technical reports.
Control of pipelines and pipeline systems
RP0375-94 Wax Coating Systems for Underground Piping Systems
This technical standard provides material requirements, surface preparation recommendations, and application techniques for the successful use of hot or cold-applied wax and component wrappers and wax tape coating systems for the protection of pipes, linings, and valves. Lists recommended physical requirements for different types of coating systems and the corresponding ASTM standard test methods.
Price: $18 List, $14 NACE Member (Item No. 21013).
RP0394-94 Application, Performance, and Quality Control of Plant-Applied, Coal Tar Enamel External Pipe Coating Systems
This technical standard presents guidelines for establishing minimum requirements to ensure proper performance of coal tar enamel coating systems. Recommended physical property requirements and surface preparation, application,inspection, and repair practices are described.
Price: $18 List, $14 NACE Member (item No. 21064)
Inspection requirements for cast sacrificial anodes
RP0387-99 Metallurgical and Inspection Requirements for Cast Galvanic Anodes for Offshore Applications
Technically revised in 1999, this technical standard defines the minimum physical quality and inspection standard for cast sacrificial anodes for offshore applications. The objectives of the standard are:
to standardise an industry-wide practice that can be used by consultants,manufacturers, and users to define the physical requirements of anodes; and
to be specific enough to assist the inspection authority in its task of confirming that anodes comply with the physical requirements.
Price: $18 List, $14 NACE Member (Item No. 21036).
RP0492-92 Metallurgical and Inspection Requirements for Offshore Pipeline Bracelet Anodes
This technical standard sets the minimum physical quality and inspection standards for cast sacrificial anodes for offshore pipeline applications, The standard is applicable to typically half-shell or a segmented bracelet-type anodes and is not intended to apply to platform, hull, tank, or extruded-type anodes. The section on physical requirements includes information on samples for chemical analysis; anode identification, weight, dimensions, and straightness insert dimensions and position; insert material; fabrication of inserts by welding; insert surface preparation; surface irregularities on the anode casting; cracks in cast anodic materials; defects; and more.
Price: $18 list, $14 NACE Member (Item No. 21056).
Coatings and lining systems
RP0375-94 Wax Coating Systems for Underground Piping Systems
This technical standard provides material requirements, surface preparation recommendations, and application techniques for the successful use of hot- or cold-applied wax component wrappers and wax tape coating systems for the protection of pipes, fittings and valves, Lists recommended physical requirements for different types of coating systems and the corresponding ASTM standard test methods,
Price $18 List, $14 NACE Member (Item No. 21013).
RP0399-99 Application, Performance, and Quality Control of Plant-applied, Coal Tar Enamel External Pipe Coating Systems
This technical standard presents guidelines for establishing minimum requirements to ensure proper performance of coal tar enamel coating systems. Recommended physical property requirements and surface preparation, application,inspection and repair practices are described.
Price: $18 List, $14 NACE Member (Item No. 21089).
NACE No.8/SSPC-SP 14 Industrial Blast Cleaning
This joint standard presents requirements for industrial blast cleaning of steel surfaces by the use of abrasives. Defines industrial blast cleaning and includes sections on procedures before blast cleaning, blast cleaning methods and operation, blast cleaning abrasives, procedures following blast cleaning,inspection, and safety and environmental requirements. NACE No.8/SSPC-SP 14 box also been added to the NACE/SSPC Joint Surface Preparation Standards package which includes seven standards.
Price: $14 List and NACE Member (Item No. 21088).
IOD199 External, Buried Steel Pipeline Repair and Rehabilitation Coatings
This report provides detailed, generic product information on the 14 types of pipeline coatings most often used for repair and rehabilitation projects, and general guidance on coating selection. Information on surface preparation,application methods, and inspection is also included.
Price: S18 List, $12 NACE Member (Item No. 24201).
NACE 6GI98/SSPC-T R2 Wet Abrasive Blast Cleaning
This joint report describes the procedures, equipment, and materials used for air/water/abrasive, water/abrasive, and pressurised water/abrasive blasting. Information on inhibitors, equipment maintenance, and safety-, guidelines also included.
Price: $18List ,$12 NACE Member (Item No. 24199).
To order these products, contact the NACE Membership Services Department. Tel: +1 281/228-6223; Fax: +1 281/228 6329; E-mail: msd@mail.nace.org. Or, go to www.nace.org and place your order over the Internet via NACE Standards Online. NACE international now offers its 108 standards on corrosion control for purchase from the NACE Web site.
