Skip to Main Content
Article navigation
Volume 36, Issue 5
1 May 1989
This article was originally published in
Anti-Corrosion Manual
Anti-Corrosion Manual Cover Image for Volume 36, Issue 5
Review Article| May 01 1989

The effect of the abrasive work mix on paint performance over blasted steel Available to Purchase

M. Morcillo;
M. Morcillo
Centro Nacional de Investigaciones Metalurgicas, Avda. Gregorio del Amo, 8; 28040‐Madrid, Spain
Search for other works by this author on:
This Site
PubMed
Google Scholar
J.M. Bastidas;
J.M. Bastidas
Centro Nacional de Investigaciones Metalurgicas, Avda. Gregorio del Amo, 8; 28040‐Madrid, Spain
Search for other works by this author on:
This Site
PubMed
Google Scholar
J. Simancas;
J. Simancas
Centro Nacional de Investigaciones Metalurgicas, Avda. Gregorio del Amo, 8; 28040‐Madrid, Spain
Search for other works by this author on:
This Site
PubMed
Google Scholar
J.C. Galvan
J.C. Galvan
Centro Nacional de Investigaciones Metalurgicas, Avda. Gregorio del Amo, 8; 28040‐Madrid, Spain
Search for other works by this author on:
This Site
PubMed
Google Scholar
Author & Article Information
Publisher: Emerald Publishing
Online ISSN: 2977-7003
Print ISSN: 0066-4731
© MCB UP Limited
1989
Anti-Corrosion Manual (1989) 36 (5): 4–8.
https://doi.org/10.1108/eb020755

In anticorrosive painting of structural steel the preparation of the metallic surface prior to the application of the organic coating is an important, if not more so, as the selection of the paint system.

This content is only available via PDF.
© MCB UP Limited
1989
You do not currently have access to this content.
Don't already have an account? Register

Purchased this content as a guest? Enter your email address to restore access.

Please enter valid email address.
Email address must be 94 characters or fewer.
Pay-Per-View Access
$41.00
Rental
This article is also available for rental through DeepDyve. Read this now at DeepDyve
167 Views
6 Crossref
View Metrics
A mechanistic study on the passivation degradation of 5083 Al alloy exposed to seawater tidal zone
Microstructure and wear mechanism of different laser-clad zones of Ti-based composite coating with high content of WC particles
Synergistic effect of oxide film and MTZ: achieving optimal corrosion inhibition efficiency for L245 carbon steel in CO2–O2 coexisting environments
Research on the corrosion behavior of the 1050A aluminum alloy under various simulated atmospheric

Recommended for you

These recommendations are informed by your reading behaviors and indicated interests.

Cited By

Google Scholar
CrossRef (6)
This Feature Is Available To Subscribers Only

or Create an Account

Close Modal
Close Modal