Characterisation and Evaluation of the Underfill Encapsulants for Flip Chip Assembly Available to Purchase

Studies of solder‐bumped flip chips on organic substrates reported in the literature have so far suggested the necessity of a polymeric underfill to compensate for the large thermal mismatch between the silicon and the substrate. In this company's target applications of this process, the underfill not only has to meet the much published mechanical and chemical requirements, but also has to flow through a vertical clearance of 0.020 to 0.0375 mm quickly as well as being cured in a relatively short time. The evaluation of the underfill materials starts with some basic understanding of how the different ingredients in the underfill formulation might affect its physical and chemical properties. The flow characteristics of the underfills were a first priority in the selection. A detailed thermal‐mechanical analysis then helped to determine the optimal cure schedule with the desired physical properties. A simple test die/test board system has been designed to evaluate how the underfill might work in a quasi‐production process and to allow for subsequent reliability evaluation. This paper highlights the ‘pluses and minuses’ of the currently available commercial underfills in relation to the optimisation of a high‐volume production process.