Skip to Main Content
Article navigation
Volume 8, Issue 3
1 March 1956
This article was originally published in
Scientific Lubrication
Scientific Lubrication Cover Image for Volume 8, Issue 3
Review Article| March 01 1956

The Correct Lubrication of TEXTILE MACHINERY: PART ONE PRACTICAL CONSIDERATIONS: BALE BREAKING MACHINERY: CARD ROOM, etc. Available to Purchase

S.F. CHISHOLM;
S.F. CHISHOLM
Mobil Oil Co., Ltd., Chief Engineer Industrial
Search for other works by this author on:
This Site
PubMed
Google Scholar
R. COATS
R. COATS
Mobil Oil Co., Ltd., Divisional Senior Engineer
Search for other works by this author on:
This Site
PubMed
Google Scholar
Author & Article Information
Publisher: Emerald Publishing
Online ISSN: 2977-7224
Print ISSN: 0371-0947
© MCB UP Limited
1956
Scientific Lubrication (1956) 8 (3): 12–19.
https://doi.org/10.1108/eb052380

HISTORICAL. THE story of textile manufacture and the development of machinery designed to increase the production of yarns and cloths is an absorbing history. Although from the earliest times man has been master of the art of spinning and weaving, yet it is only during the last 200 years that any form of mechanisation has entered the industry.

This content is only available via PDF.
© MCB UP Limited
1956
You do not currently have access to this content.
Don't already have an account? Register

Purchased this content as a guest? Enter your email address to restore access.

Please enter valid email address.
Email address must be 94 characters or fewer.
Pay-Per-View Access
$41.00
Rental
This article is also available for rental through DeepDyve. Read this now at DeepDyve
180 Views
View Metrics
Study on the influence of laser parameters on the tribological properties of microtextured cemented carbide
Synergistic mechanisms of ultrasonic vibration-assisted laser surface texturing on Ti-6Al-4V: microstructural evolution and tribological enhancement
Coupling biomimetic micro-textures with MoS2 solid lubricant to enhance tribological properties of Ti6Al4V
Study on the evolution of fretting and sliding worn surface under dry friction condition

Suggested Reading

Design and specification of tyre bales in construction
Proceedings of the Institution of Civil Engineers - Waste and Resource Management (May,2008)
Application of tyre bales to slope failure repair
Proceedings of the Institution of Civil Engineers - Engineering Sustainability (September,2009)
Briefing: Challenges related to straw bale construction
Proceedings of the Institution of Civil Engineers - Engineering Sustainability (December,2010)
Straw Bale Building and its' Economic Perspective
Open House International (March,2017)
Use of waste tyre bales to construct a flood embankment
Proceedings of the Institution of Civil Engineers - Waste and Resource Management (May,2006)

Related Chapters

Chapter 73: Straw bale construction – state of the art
ICE manual of Construction Materials: Volume I: Fundamentals and theory; Concrete; Asphalts in road construction; Masonry
Chapter 74: Alternative materials for construction
ICE manual of Construction Materials: Volume I: Fundamentals and theory; Concrete; Asphalts in road construction; Masonry
The use of post-consumer tyres in civil engineering
Sustainable Waste Management and Recycling: Used/Post-Consumer Tyres: Proceedings of the International Conference organised by the Concrete and Masonry Research Group and held at Kingston University - London on 14-15 September 2004.

Recommended for you

These recommendations are informed by your reading behaviors and indicated interests.

Cited By

Google Scholar
This Feature Is Available To Subscribers Only

or Create an Account

Close Modal
Close Modal